Add to Cart
As a rigid flex PCB is a complete circuit on its own, there isn’t a
need for installing a wire harness in the enclosure it is mounted
on. Such a wiring job takes up precious time and is an additional
cost for each unit of the product.
Ease Of Testing
It is also easy to automate testing of a rigid flex PCB as all the
subcircuits are already interconnected when the PCB is
manufactured. The ability to eliminate connectivity issues before
the components are assembled, further, prevent unnecessary wastage
and expenses.
Layers: 8L rigid flex pcb
Board Thinkness:0.69mm+/-0.2mm
PCB thickness in flex section:0.1mm+/-0.1mm
Base Material:PI+FR4pp
Min laser Holes:0.075mm(3mil)
Min mechanical Holes:0.15mm
Minimum Line Width/Clearance:0.046mm/0.046mm( 1.8mil/1.8mil)
Minimum Clearance between Inner Layer PTH and Line: 0.175mm
Size:160.92mm×145mm
Aspect Ratio:4.6 : 1
Surface treatment:ENIG
Speciality: rigid flex pcb multilayer fpc HDI Any-Layer PCBs
stacked vias, Fine circuit 1.8mil, High Density Interconnect PCB
1.8mil/1.8mil,Laser via copper plated shut
Differential impedance 100+7/-8Ω
Applications: Medical stimulator
YS Rigid Flex PCB manufacturing capabilities overview
Feature | capabilities | |
Layer Count | 2-20L | |
Rigid-Flex Thickness | 0.3mm-5.0mm | |
PCB thickness in flex section | 0.08-0.8mm | |
copper Thickness | 1/4OZ-10OZ | |
Minimum line Width and Space | 0.05mm/0.05mm(2mil/2mil) | |
Stiffeners | Stainless steel,PI, FR4 etc. | |
Material | Polyimide Flex+FR4,RA copper, HTE copper, polyimide, adhesive,Bondply | |
Min mechanical Drilled Size | 0.15mm(6mil) | |
Min laser Holes Size: | 0.075mm(3mil) | |
Surface Finish | Suitable Microwave/RF PCB urface finishes: Electroless Nickel, Immersion Gold, ENEPIG, Lead free HASL,Immersion Silver.etc. | |
Solder Mask | Green, Red, Yellow, Blue, White, Black, Purple, Matte Black, Matte green.etc. | |
Covrelay (Flex Part) | Coverlay, WhiteCoverlay,Black |
layer/m² | S<1㎡ | S<3㎡ | S<6㎡ | S<10㎡ | S<13㎡ | S<16㎡ | S<20㎡ | S<30㎡ | S<40㎡ | S<50㎡ | S<65㎡ | S<85㎡ | S<100㎡ |
1L | 4wds | 6wds | 7wds | 7wds | 9wds | 9wds | 10wds | 10wds | 10wds | 12wds | 14wds | 15wds | 16wds |
2L | 4wds | 6wds | 9wds | 9wds | 11wds | 12wds | 13wds | 13wds | 15wds | 15wds | 15wds | 15wds | 18wds |
4L | 6wds | 8wds | 12wds | 12wds | 14wds | 14wds | 14wds | 14wds | 15wds | 20wds | 25wds | 25wds | 28wds |
6L | 7wds | 9wds | 13wds | 13wds | 17wds | 18wds | 20wds | 22wds | 24wds | 25wds | 26wds | 28wds | 30wds |
8L | 9wds | 12wds | 15wds | 18wds | 20wds | 20wds | 22wds | 24wds | 26wds | 27wds | 28wds | 30wds | 30wds |
10L | 10wds | 13wds | 17wds | 18wds | 20wds | 20wds | 22wds | 24wds | 26wds | 27wds | 28wds | 30wds | 30wds |
12L | 10wds | 15wds | 17wds | 18wds | 20wds | 20wds | 22wds | 24wds | 26wds | 27wds | 28wds | 30wds | 30wds |
14L | 10wds | 16wds | 17wds | 18wds | 20wds | 20wds | 22wds | 24wds | 26wds | 27wds | 28wds | 30wds | 30wds |
16L | 10wds | 16wds | 17wds | 18wds | 20wds | 20wds | 22wds | 24wds | 26wds | 27wds | 28wds | 30wds |
|
FQA
1. Do you offer double-layer flexible PCB?
Yes, we make single layer flexible PCB, double sided flexible PCB,
multi-layer flexible PCB, and Rigid-Flex PCBs.
2. Do you provide stiffeners and cover films?
Yes, we provide black PI stiffeners, yellow PI cover films,
transparent polyimide films, white overlay, and brown PI copper
clad laminates.
3. Do you use adhesive free copper foil base material?
Yes. We have four manufacturing methods for adhesive-free copper
foil base materials. We use spray plating, curtain coating,
electroless deposition/electrolytic plating, and laminating.
4. What are the minimum and maximum thickness of your adhesive flex
PCBs?
Minimum thickness is 2 µm and the maximum is 200 µm.
We ensure high chemical durability and processing compatibility for
flexible printed circuits and do not sacrifice its original
electrical property, heat-resistant property, and mechanical
property.
5. Which IPC standards do you follow?
IPC Standards for Rigid and Flexible PCBs
The list of IPC standards below applies to rigid PCBs and flex
circuits. Take note that this list is not exhaustive, and
additional IPC standards may need to be considered.