CLRC66303HNE RFID Reader/Transponder IC 13.56MHz ISO 2.5V ~ 5.5V 32-VFQFN

CLRC66303HNE RFID Reader/Transponder IC 13.56MHz ISO 2.5V ~ 5.5V 32-VFQFN

General description

CLRC663, the high performance multi-protocol NFC frontend. The CLRC663 multi-protocol NFC frontend IC supports the following operating modes

• Read/write mode supporting ISO/IEC 14443 type A and MIFARE Classic communication mode

• Read/write mode supporting ISO/IEC 14443B

• Read/write mode supporting JIS X 6319-4 (comparable with FeliCa)

• Passive initiator mode according to ISO/IEC 18092

• Read/write mode supporting ISO/IEC 15693

• Read/write mode supporting ICODE EPC UID/ EPC OTP

• Read/write mode supporting ISO/IEC 18000-3 mode 3/ EPC Class-1 HF

The CLRC663’s internal transmitter is able to drive a reader/writer antenna designed to communicate with ISO/IEC 14443A and MIFARE Classic IC-based cards and transponders without additional active circuitry. The digital module manages the complete ISO/IEC 14443A framing and error detection functionality (parity and CRC). The CLRC663 supports MIFARE Classic with 1 kB memory, MIFARE Classic with 4 kB memory, MIFARE Ultralight, MIFARE Ultralight C, MIFARE Plus and MIFARE DESFire products. The CLRC663 supports higher transfer speeds of the MIFARE product family up to 848 kbit/s in both directions. The CLRC663 supports layer 2 and 3 of the ISO/IEC 14443B reader/writer communication scheme except anticollision. The anticollision needs to be implemented in the firmware of the host controller as well as in the upper layers. The CLRC663 is able to demodulate and decode FeliCa coded signals. The FeliCa receiver part provides the demodulation and decoding circuitry for FeliCa coded signals. The CLRC663 handles the FeliCa framing and error detection such as CRC. The CLRC663 supports FeliCa higher transfer speeds of up to 424 kbit/s in both directions. The CLRC663 is supporting the P2P passive initiator mode in accordance with ISO/IEC 18092. The CLRC663 supports the vicinity protocol according to ISO/IEC15693, EPC UID and ISO/IEC 18000-3 mode 3/ EPC Class-1 HF. The following host interfaces are supported: • Serial Peripheral Interface (SPI) • Serial UART (similar to RS232 with voltage levels dependent on pin voltage supply) • I 2C-bus interface (two versions are implemented: I2C and I2CL) The CLRC663 supports the connection of a secure access module (SAM). A dedicated separate I2C interface is implemented for a connection of the SAM. The SAM can be used for high secure key storage and acts as a very performant crypto-coprocessor. A dedicated SAM is available for connection to the CLRC663. In this document, the term „MIFARE Classic card“ refers to a MIFARE Classic IC-based contactless card.

Features and benefits

• Includes NXP ISO/IEC14443-A and Innovatron ISO/IEC14443-B intellectual property licensing rights

• High performance multi-protocol NFC frontend for transfer speed up to 848 kbit/s

• Supports ISO/IEC 14443 type A, MIFARE Classic, ISO/IEC 14443 B and FeliCa reader modes

• P2P passive initiator mode in accordance with ISO/IEC 18092

• Supports ISO/IEC15693, ICODE EPC UID and ISO/IEC 18000-3 mode 3/ EPC Class-1 HF

• Supports MIFARE Classic product encryption by hardware in read/write mode Allows reading cards based on MIFARE Ultralight, MIFARE Classic with 1 kB memory, MIFARE Classic with 4 kB memory, MIFARE DESFire EV1, MIFARE DESFire EV2 and MIFARE Plus ICs

• Low-Power Card Detection

• Compliance to EMV contactless protocol specification on RF level can be achieved

• Supported host interfaces:

– SPI up to 10 Mbit/s

– I 2C-bus interfaces up to 400 kBd in Fast mode, up to 1000 kBd in Fast mode plus

– RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on pin voltage supply

• Separate I2C-bus interface for connection of a secure access module (SAM)

• FIFO buffer with size of 512 bytes for highest transaction performance

• Flexible and efficient power-saving modes including hard power down, standby and low-power card detection

• Cost saving by integrated PLL to derive system clock from 27.12 MHz RF quartz crystal

• 3.0 V to 5.5 V power supply (CLRC66301, CLRC66302) 2.5 V to 5.5 V power supply (CLRC66303)

• Up to 8 free programmable input/output pins

• Typical operating distance in read/write mode for communication to a ISO/IEC 14443 type A and MIFARE Classic card up to 12 cm, depending on the antenna size and tuning

• Two package options are available for the CLRC66303: 1. HVQFN32: Package with wettable flanks easing the soldering process and quality control of soldered parts 2. VFBGA36: Smallest package with optimized pin configuration for simple PCB layout

• The version CLRC66303 offers a more flexible configuration for Low-Power Card detection compared to the CLRC66301 and CLRC66302 with the new register LPCD_OPTIONS. In addition, the CLRC66303 offers new additional settings for the Load Protocol which fit very well to smaller antennas. The CLRC66303 is therefore the recommended version for new designs.

Applications

• Industrial

• Access control

• Gaming

specification of CLRC66303HNE

ORIGINAL

Our company ensures that each batch of products comes from the original factory, and can provide original labels and professional testing agency reports.

PRICE

We provide a variety of quotation channels, and sign the order contract after negotiation.

TRANSACTION

After communication and agreement, we will guide you to arrange payment.

DELIVERY CYCLE

Delivery on the same day, generally 5-12 working days, may be slightly delayed during the epidemic, we will follow up the whole process.

TRANSPORT

We will choose the appropriate transportation mode according to your country.

PACKAGING

After communication with you, we will choose the appropriate packaging method according to the weight of the goods to ensure the safe delivery of the goods.

Shenzhen Xinyuanpeng Technology Co., Ltd. is a special distributor focusing on electronic components of global famous brands.

It mainly distributes TI, ST, RENESAS, INFINEON, MICROCHIP, NXP, ON, DIODES and other domestic and foreign brands, and is a well-known wholesaler and channel provider of electronic components at home and abroad. The company adheres to the concept of "integrity, innovation, harmony and win-win", and adheres to the principle of "quality first, customer first" to serve customers at home and abroad. We will solve the problems of new and old customers with professional product application knowledge and timely and effective services. The company's distribution products include integrated circuits, memory chips, microprocessors, amplifiers, power ICs, optocouplers, driver ICs, LED light-emitting diodes, transistors and other electronic components. Customers focus on aerospace, military, medical equipment, automotive electronics, power, computer, communications, telecommunications, consumer electronics, security monitoring, electronic instruments, intelligent robots, industrial control instruments and other industries. Strong business: high-end IC, military IC, power IC, MCU, power amplifier operational amplifier, logic chip, optocoupler, etc.

With the joint efforts of all employees and the support of our customers, the company continues to innovate and develop step by step, wholeheartedly provides all-round services to customers at home and abroad, and promises that all materials sold from the company: only original and authentic products, and all fake goods are prohibited. We hope to cooperate with new and old customers for mutual benefit and win-win results!