CY7C433-20JXC Integrated Circuit Chip Original Integrated Circuit

Certification:new & original
Model Number:CY7C433-20JXC
Minimum Order Quantity:10pcs
Delivery Time:1 day
Payment Terms:T/T, Western Union, Paypal
Place of Origin:original factory
Contact Now

Add to Cart

Active Member
Location: Shenzhen China
Address: Room 1204, DingCheng International Building, 518028 Futian District, SHENZHEN, CN
Supplier`s last login times: within 48 hours
Product Details Company Profile
Product Details

Stock Offer (Hot Sell)

Part no.QuantityBrandD/CPackage
CS4344-CZZR3800CIRRUS16+MSOP
LTC1844ES5-3.33800LINEAR16+SOT23-5
MC33039P3800ON13+DIP-8
MMA7660FCR13800FREESCALE15+DFN-10
NLV32T-100J-PF3800TDK16+SMD
PC4013800SHARP16+SOP-5
SN75179BP3800TI14+DIP8
STP10NK70ZFP3800ST14+TO-220
UC3842BD1R2G3800ON14+SOP-8
LM393DR3810TI16+SOP8
BZX84-C18382016+SOT-23
LPC2136FBD64382013+TQFP-64
LP3982IMMX-2.53821NS15+MSOP8
TOP224PN3821POWER16+DIP-8
TLP1213822TOSHIBA16+SOP-4
IRF49053870IR14+TO-220
MC34033870ON14+SOP-14
P2504EDG3870INKO14+TO-252
STB16NS253870ST16+TO-263
SSM3K7002FU3871TOSHIBA16+SOT323
3122V3880SANYO13+TO-3P
CD4017BCN3880NSC15+DIP
MIC842LYC53880MICREL16+SC70-5
IMZ2A3887ROHM16+SOT-163
EPCS4SI8N3888ALTERA14+SOP-8
SN74LVC1T45DCK3888TI14+SC-70-6
UCC2813D-23888TI14+SOP8
2SC45523900NEC16+TO-220
MC14551BDR2G3900ON16+SOP16
MX29LV040CQC-70G3900MXIC13+PLCC

CY7C419/21/25/29/33

256/512/1K/2K/4K x 9 Asynchronous FIFO


Features

• Asynchronous first-in first-out (FIFO) buffer memories

• 256 x 9 (CY7C419)

• 512 x 9 (CY7C421)

• 1K x 9 (CY7C425)

• 2K x 9 (CY7C429)

• 4K x 9 (CY7C433)


• Dual-ported RAM cell

• High-speed 50.0-MHz read/write independent of depth/width

• Low operating power: ICC = 35 mA

• Empty and Full flags (Half Full flag in standalone)

• TTL compatible

• Retransmit in standalone


• Expandable in width

• PLCC, 7x7 TQFP, SOJ, 300-mil and 600-mil DIP

• Pb-Free Packages Available

• Pin compatible and functionally equivalent to IDT7200, IDT7201, IDT7202, IDT7203, IDT7204, AM7200, AM7201, AM7202, AM7203, and AM7204


Functional Description

The CY7C419, CY7C420/1, CY7C424/5, CY7C428/9, and CY7C432/3 are first-in first-out (FIFO) memories offered in 600-mil wide and 300-mil wide packages. They are, respectively, 256, 512, 1,024, 2,048, and 4,096 words by 9-bits wide. Each FIFO memory is organized such that the data is read in the same sequential order that it was written. Full and Empty flags are provided to prevent overrun and underrun. Three additional pins are also provided to facilitate unlimited expansion in width, depth, or both. The depth expansion technique steers the control signals from one device to another in parallel, thus eliminating the serial addition of propagation delays, so that throughput is not reduced. Data is steered in a similar manner.


The read and write operations may be asynchronous; each can occur at a rate of 50.0 MHz. The write operation occurs when the write (W) signal is LOW. Read occurs when read (R) goes LOW. The nine data outputs go to the high-impedance state when R is HIGH.


A Half Full (HF) output flag is provided that is valid in the standalone and width expansion configurations. In the depth expansion configuration, this pin provides the expansion out (XO) information that is used to tell the next FIFO that it will be activated.


In the standalone and width expansion configurations, a LOW on the retransmit (RT) input causes the FIFOs to retransmit the data. Read enable (R) and write enable (W) must both be HIGH during retransmit, and then R is used to access the data.


The CY7C419, CY7C420, CY7C421, CY7C424, CY7C425, CY7C428, CY7C429, CY7C432, and CY7C433 are fabricated using an advanced 0.65-micron P-well CMOS technology. Input ESD protection is greater than 2000V and latch-up is prevented by careful layout and guard rings.


Maximum Rating[1]

(Above which the useful life may be impaired. For user guidelines, not tested.)


Storage Temperature .................................–65°C to +150°C

Ambient Temperature with

Power Applied.............................................–55°C to +125°C


Supply Voltage to Ground Potential ............... –0.5V to +7.0V

DC Voltage Applied to Outputs

in High Z State................................................–0.5V to +7.0V


DC Input Voltage ............................................–0.5V to +7.0V

Power Dissipation.......................................................... 1.0W

Output Current, into Outputs (LOW)............................ 20 mA


Static Discharge Voltage............................................ >2000V

(per MIL–STD–883, Method 3015)

Latch-Up Current..................................................... >200 mA

Note: 1. Single Power Supply: The voltage on any input or I/O pin can not exceed the power pin during power-up.


Operating Range

RangeAmbient Temperature[2]VCC
Commercial0°C to + 70°C5V ± 10%
Industrial–40°C to +85°C5V ± 10%
Military–55°C to +125°C5V ± 10%

China CY7C433-20JXC Integrated Circuit Chip Original Integrated Circuit supplier

CY7C433-20JXC Integrated Circuit Chip Original Integrated Circuit

Inquiry Cart 0