74HCT1G125GW Electronic IC Chips linear integrated circuits line driver

Certification:new & original
Model Number:74HCT1G125GW
Minimum Order Quantity:20pcs
Delivery Time:1 day
Payment Terms:T/T, Western Union, Paypal
Place of Origin:original factory
Contact Now

Add to Cart

Active Member
Location: Shenzhen China
Address: Room 1204, DingCheng International Building, 518028 Futian District, SHENZHEN, CN
Supplier`s last login times: within 48 hours
Product Details Company Profile
Product Details

Stock Offer (Hot Sell)

Part No.QuantityBrandD/CPackage
SN74HC541PW39000TI07+TSSOP-20
SN74HC541PWR87000TI04+TSSOP-20
SN74HC573AN9373TI16+DIP-20
SN74HC574N9444TI16+SOP-20
SN74HC590AN10493TI15+DIP-16
SN74HC595DWR17609TI02+SOP-16
SN74LS04N11203TI15+SOP-14
SN74LS05N7457TI95+SOP-14
SN74LS07DR9255TI16+SOP-14
SN74LS07N14682TI16+DIP-14
SN74LS132N7428TI14+DIP-14
SN74LS138DR8860TI16+SOP-16
SN74LS138N4238TI15+DIP-16
SN74LS145DR11984TI13+SOP-16
SN74LS148DR16244TI93+SOP-16
SN74LS153N6801TI84+DIP-16
SN74LS194N5146TI15+DIP-16
SN74LS240DWR8481TI16+SOP-20
SN74LS247N10272TI12+DIP-16
SN74LS279ADR4087TI10+SOP-16
SN74LS373N11274TI15+DIP-20
SN74LS374N10564TI14+DIP-20
SN74LS76AN6267TI16+DIP-16
SN74LS83N10343TI13+DIP-16
SN74LS86AN16315TI14+DIP-14
SN74LV244ADWR100000TI13+SOP-20
SN74LV245ADWR23344TI12+SOP-20
SN74LV4052ADR35000TI16+SOP-16
SN74LVC04ADR9000TI16+SOP-14
SN74LVC07ADR64000TI16+SOP-14

74HC1G125; 74HCT1G125

Bus buffer/line drivers; 3-state


FEATURES

• Wide supply voltage range from 2.0 to 6.0 V

• Symmetrical output impedance

• High noise immunity

• Low power dissipation

• Balanced propagation delays

• Very small 5 pins package

• Output capability: bus driver.


DESCRIPTION

The 74HC1G/HCT1G125 is a high-speed Si-gate CMOS device.

The 74HC1G/HCT1G125 provides one non-inverting buffer/line driver with 3-state output. The 3-state output is controlled by the output enable input pin (OE). A HIGH at pin OE causes the output as assume a high-impedance OFF-state.

The bus driver output currents are equal compared to the 74HC/HCT125.


LIMITING VALUES

In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V).

SYMBOLPARAMETERCONDITIONSMIN.MAX.UNIT
VCCsupply voltage−0.5+7.0V
IIKinput diode currentVI < −0.5 V or VI > VCC + 0.5 V; note 1±20mA
IOKoutput diode currentVO < −0.5 V or VO > VCC + 0.5 V; note 1±20mA
IOoutput source or sink current−0.5 V < VO < VCC + 0.5 V; note 1±12.5mA
ICCVCC or GND currentnote 1±25mA
Tstgstorage temperature−65+150°C
PDpower dissipation per packagefor temperature range from −40 to +125 °C; note 2200mW

Notes

1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

2. Above 55 °C the value of PD derates linearly with 2.5 mW/K.


China 74HCT1G125GW Electronic IC Chips linear integrated circuits line driver supplier

74HCT1G125GW Electronic IC Chips linear integrated circuits line driver

Inquiry Cart 0