MIC2026-2YM Electronic IC Chips Dual-Channel Power Distribution Switch

MIC2026/2076

Dual-Channel Power Distribution Switch

General Description

The MIC2026 and MIC2076 are high-side MOSFET switches optimized for general-purpose power distribution requiring circuit protection.

The MIC2026/76 are internally current limited and have thermal shutdown that protects the device and load.

The MIC2076 offers “smart” thermal shutdown that reduces current consumption in fault modes. When a thermal shutdown fault occurs, the output is latched off until the faulty load is removed. Removing the load or toggling the enable input will reset the device output.

Both devices employ soft-start circuitry that minimizes inrush current in applications where highly capacitive loads are employed.

A fault status output flag is asserted during overcurrent and thermal shutdown conditions. Transient faults are internally filtered.

The MIC2026/76 are available in 8-pin DIP or 8-pin SOIC.

Features

• 140mΩ maximum on-resistance per channel

• 2.7V to 5.5V operating range

• 500mA minimum continuous current per channel

• Shortcircuit protection with thermal shutdown

• Thermally isolated channels

• Fault status flag with 3ms filter eliminates false assertions

• Undervoltage lockout

• Reverse current flow blocking (no “body diode”)

• Circuit breaker mode (MIC2076)

• Logic-compatible inputs

• Soft-start circuit

• Low quiescent current

• Pin compatible with MIC2526

• UL File # E179633

Applications

• USB peripherals

• General purpose power switching

• ACPI power distribution

• Notebook PCs

• PDAs

• PC card hot swap

Typical Application

Absolute Maximum Ratings ⁽¹⁾

Supply Voltage (V_IN)........................................ –0.3V to +6V

Fault Flag Voltage (V_FLG)................................................+6V

Fault Flag Current (I_FLG) ..............................................25mA

Output Voltage (V_OUT) ....................................................+6V

Output Current (I_OUT) .................................Internally Limited

Enable Input (I_EN) ..................................... –0.3V to V_IN + 3V

Storage Temperature (T_S)........................–65°C to +150 °C

ESD Rating⁽³⁾

HBM.........................................................................1kV

MM.........................................................................200V

Operating Ratings ⁽²⁾

Supply Voltage (V_IN)..................................... +2.7V to +5.5V

Ambient Temperature (T_A) ..........................–40°C to +85°C

Junction Temperature Range (T_J).............Internally Limited

Thermal Resistance

SOIC (θ_JA)........................................................160°C/W

PDIP (θ_JA) ........................................................105°C/W

Notes:

1. Exceeding the absolute maximum rating may damage the device.

2. The device is not guaranteed to function outside its operating rating.

3. Devices are ESD sensitive. Handling precautions recommended.

Stock Offer (Hot Sell)

CHONGMING GROUP (HK) INT'L CO., LTD. located in Hong Kong and Shenzhen. We are an independent Distributor of Electronic Components,established in 2008. AS a growing fast company, CM GROUP is renowned for its world-class efficiency, excellent services, and extraordinary ability to supply electronic components that are hard to find and even obsolete. We have taken pride in our innovation, reliability and service, especially in the semiconductor marketplace.
Our distribution brands include XILINX，ALTERA，ATMEL, INFINEON, ST,SAMSUNG，TEXAS INSTRUMENTS，ON，TOSHIBA，，MICROCHIP，CYPRESS，FREESCALE，etc. We distributes over 200,000 products ranging from semiconductors to resistors, capacitors, diodes, inductors, connectors, transistors, sensors and so on.
Our mission is to meet and exceed all the expecations of what we supply to customers.