TPS51225BRUKR TPS51225CRUKR Power Path Management IC Switching Controllers Dual Sync Step-Down Controller

TPS51225BRUKR TPS51225CRUKR Power Path Management IC Switching Controllers Dual Sync Step-Down Controller

FEATURES

• Input Voltage Range: 5.5 V to 24 V

• Output Voltages: 5 V and 3.3 V (Adjustable Range ±10%)

• Built-in, 100-mA, 5-V and 3.3-V LDOs

• Clock Output for Charge-Pump

• ±1% Reference Accuracy

• Adaptive On-time D-CAPTM Mode Control Architecture with 300kHz/355kHz Frequency Setting

• Auto-skip Light Load Operation (TPS51225/C)

• OOA Light Load Operation (TPS51225B)

• Internal 0.8-ms Voltage Servo Soft-Start

• Low-Side RDS(on) Current Sensing Scheme with 4500 ppm/°C Temperature Coefficient

• Built-in Output Discharge Function

• Separate Enable Input for Switchers (TPS51225/B/C)

• Dedicated OC Setting Terminals

• Power Good Indicator

• OVP/UVP/OCP Protection

• Non-latch UVLO/OTP Protection

• 20-Pin, 3 mm × 3 mm, QFN (RUK)

APPLICATIONS
• Notebook Computers
• Netbook, Tablet Computers

DESCRIPTION

The TPS51225/B/C is a cost-effective, dual- synchronous buck controller targeted for notebook system-power supply solutions. It provides 5-V and 3.3-V LDOs and requires few external components. The 260-kHz VCLK output can be used to drive an external charge pump, generating gate drive voltage for the load switches without reducing the main converter efficiency. The TPS51225/B/C supports high efficiency, fast transient response and provides a combined power-good signal. Adaptive on-time, D- CAPTM control provides convenient and efficient operation. The device operates with supply input voltage ranging from 5.5 V to 24 V and supports output voltages of 5.0 V and 3.3 V. The TPS51225/B/C is available in a 20-pin, 3 mm × 3 mm, QFN package and is specified from –40°C to 85°C.