Product Details
EN10088-2 Precision stainless steel strip coil 1.4301 or SUS 304
0.18*25.3mm
Introduction:
Which is harder 316 or 304?
When it comes to tensile strength, the two are almost identical. The yield strength of 316 stainless steel is higher, but the difference is relatively small. When hardened through
cold working, both 304 and 316 stainless steel can achieve
considerably higher hardness and strength ratings.
Item | EN10088-2 Precision stainless steel strip coil 1.4301 or SUS 304
0.18*25.3mm |
Grade | 304 |
Standard | ASTM,JIS,DIN,GB |
Thickness | 0.18mm |
Width | 25.3mm |
Surface | 2B, BA |
Coil weight | customized |
Inner diameter | 300mm/400mm/500mm |
Edge finish | Slit/Mill edge |
Burr | Min 10% of the thickness. |
Application | corrugated tube |
Lead time | 15-20 days after the prepayment. |
Payment terms | 30%TT for deposit, balance payment before shipment or LC at sight. |
Place of Origin | China |
MOQ | 3 tons |
Supply ability | 3700 tons per month. |
Applications:
It is suitable for electrical appliances, stainless steel
kitchenware, hardware products, ground springs, sanitary ware,
chemical industry, petroleum, pipe making, cable wrapping, medical
treatment, bending and flanging, mechanical equipment
manufacturing, construction decoration and other industries. Hard
state is suitable for electronics, electrical appliances,
computers, high-tech product parts, adjusting gaskets, metal
stamping parts spring shrapnel and other stainless steel
industries.
Manufacturing Processes:
- Raw material
- Cold rolling
- Degreasing
- Bright annealing
- Tension levelling
- Slitting
- Packing
- Checking
Packaging:
Company Profile
Wuxi Huansheng Precision Alloy Material Co., Ltd. was established
in 2001. Its predecessor is Wuxi Huansheng Metal Products Co., Ltd.
It is an enterprise specializing in the production of various
cold-rolled stainless steel strips with a thickness of 0.02mm-3.0mm
and a width of 650mm or less, with a registered capital of 60
million. The company covers an area of nearly 30,000 square meters,
with a construction area of 46,000 square meters and an annual
production capacity of 72,000 tons. The company has more than 30
sets of high-precision key core equipment such as rolling mill,
annealing, tension leveling, and slitting. The company's technology
and quality have always been at the leading level in the same
industry.
The company covers an area of nearly 30,000 square meters, with a
construction area of 46,000 square meters and an annual production
capacity of 72,000 tons.
The new plant has designed 11 slitting lines, 2 automatic packing
lines, 1 fully automatic side wire packing line, intelligent
warehouse and machine repair workshop. The new workshop is also
planned and designed with advanced equipment such as manipulators
and intelligent driving vehicles. The whole process is automated
and intelligent, starting from the sub-striping process, to
packaging, edge silk processing, to storage and delivery.
The company has independently developed and designed two 20-high
automatic rolling mill production lines which can roll to thickness
of 0.05 and 0.02mm, and the equipment performance and technical
level