Add to Cart
Tactile Membrane Switch Metal Dome Waterproof Membrane Switch
Membrane switches also called membrane keypads to have very wide
applications and also have many different using environments. For
example in a wet environment, outdoor under sunshine UV and bad
weather of rain, boat sailing on the sea, etc. Then a waterproof
and anti-UV membrane keypads are necessary for such kind of special
application.
LUPHITOUCH manufactured waterproof membrane keypads can meet IP67
and NEMA-4 waterproof standard. For outdoor use, especially exposed
under the sunshine UV, anti-UV membrane keypads are also necessary.
The common membrane keypads can be easily damaged by strong
ultraviolet rays. Although no impact on the function, the graphic
overlay will have become ugly and the printed graphics can be faded
in a not long time.
Item | Description | Technical capabilities | ||
1 | Max. Size | 1200mm x 1000mm | ||
2 | Overlay Material | PET: Autotype (Autotex F150, F200, F280, V150, V200, V280, Autoflex EBG130, EBG180, EBG250, EBA130, EBA180, EBA250) Autotex : XEV150, XEF200; Autostat CT3, CT4, CT5, CT7 DuPont etc. PC: GE LEXAN--8010 8B35 8B35F HP92S HP40 FR700 FR60 | ||
3 | Spacer | 3M Adhesive, NITTO, TESA, SONY, SEKISUI, Domestic Adhesive | ||
4 | Back Adhesive | 3M(Mainly), Others(Little) | ||
5 | Silver Paste | CHANGSUNG: CSP-3163, CSP-3352, CSP-5150; ACHESON: ED 725A(6S-61), ED 427SS, ED 479SS, ED 976SS HV; FUJIKURA and OTTI | ||
6 | Oil Ink | SEIKO, JUJO, DUBUIT, PROELL, NORCOTE UV | ||
7 | Carbon Paste | FUJIKURA, ACHESON ED 581SS, OTTI | ||
8 | 6 Layers Metal dome Type Membrane Switch Structure | Overlay + Spacer + Dome Retainer + Spacer + Circuit Layer+ Back adhesive | ||
9 | 4 Layers Polydome Type Membrane Switch Structure | Overlay + Spacer + Circuit + Back adhesive | ||
10 | Contact Resistance | 0.5-10Ω | ||
11 | Insulation Resistance | ≥10MΩ (100VDC) | ||
12 | Base Material Voltage Durable | ≤ 2000V DC | ||
13 | Bounce Time | ≤ 5ms | ||
14 | Working Current | ≤ 100mA | ||
15 | Working Voltage | ≤ 50VDC | ||
16 | Life | ≥ 1,000,000 times | ||
17 | Key Travel | Flat type: 0.05mm-0.5mm, Tactile Type: 0.1-1.5mm | ||
18 | Working Temperature | -40ºC-+80ºC | ||
19 | Actuation Force | 20-550g | ||
20 | Storage Condition | Temperature: -40ºC~+85ºC ,Humidity: ≤98% RH | ||
21 | PET Circuit Tail Flexible Feature | 180°to any angle |
In LUPHITOUCH we use anti-UV PET materials outdoor using membrane
keypads. For example the Autotex XE series materials.
For waterproof keypads, we can design a waterproof frame on the
membrane keypads to prevent the water from going into the circuit.
Also can use rubber keypad wrapped the PCB circuit and use seal the
connection circle.
In these special environment applications, the anti-UV and
waterproof membrane keypads quality are very important. If the
water went into the circuit it will cause your control board
failure and then easily cause safety accidents. So a good supplier
of such kind of membrane keypads is very important for your
application.