Submerged Slurry Industrial Lobe Pump NBR Rubber 180-200 Rpm

Submerged pump for pumping viscous grease sludge / stable pressure

A waste water treatment plant had persistent problems with a centrifugal pump which was used for pumping grease sludge. The submerged centrifugal pump pumped the sludge from the grease sludge basin into a storage shaft from which a second pump fed a digestion tower with the grease sludge. Higher TS contents caused problems to the centrifugal pump. The recurring blockages of the pump and the complex maintenance work resulting from them were the reason why the operator of the waste water treatment plant looked for an alternative pump technology.

Following intensive research, the customer decided to purchase a submerged Accuvon rotary lobe pump. Due to its ability to pump with stable pressure, the Accuvon rotary lobe pump can convey the viscous grease sludge from the grease sludge basin into the digestion tower directly. A storage shaft and a second pump are not necessary any more.

The customer is very satisfied with the new grease sludge pump. Since the customer has been using the Accuvon rotary lobe pump there have not been any failures caused by the pump even with high TS contents of the pumped medium.

Application data:

Technical data:

Advantages of this Accuvon AP 80

- Compact, low-on-space design

- Resistant to solids

- Pressure-resistant

- Long service life

- Short-term dry-run capability

- Pumping highly viscous media

- Ease of maintenance

Similar application of chemical:

Accuvon provides many applications on-board ships and in other areas of the marine industries - from handling of both fresh and seawaters to fuels of all kinds, oil or oil sludge, bilge or other water-oil mixtures, fish or fish waste, sewage or other fluids with or without solids, of low or high viscosities.

Sewage | Ballast Water | Bilge / Loading | Oil Sludge | Fuel / Crude Oil | Oil-Water Separation | Fish / Kitchen Waste | Mud | Emulsions | Oilfield Chemicals | Marine Diesel Oil | as Skimmer Pump

Features of Accuvon Rotary Lobe Pumps:

1.Self-priming, Valve-less, Positive Displacement Pump

2. Easy Maintenance through Front Cover

3. Controllable Flow, Ratio up to 1 : 5

4. Capacity of up to 3200 m³/h

5.Pressures of up to 25 bar

6. Dry-running Capability

7.Reversibility, same pump output for both directions

8. Gentle, Low-Pulsation Pumping

9.For Viscous, Solid, Abrasive or Shea-sensitive Mediums

10. Low Parts Replacement Costs

Components of a Accuvon Rotary Lobe Pump

1 Timing gear

2 Quench and control chamber

3 Casing in block design

4 Unwetted shaft

5 Axial and radial casing protection

6 Shaft seal

7 Rotors

8 Quick-release cover

Accuvon (Guangzhou) Pumps Co., Ltd. is a Sino-German joint venture established in 2008. It specializes in design, development, manufacturing, sales, engineering applications and technical services for rotor pumps. In accordance with the German DN industrial standards and technical requirements , licensed manufacturing and sales of ACCUVON brand rotary lobe pump in China.

In the past fifteen years, ACCUVON has focused on the field of rotary lobe pumps, and is committed to providing customers with professional technical support and perfect solutions. More than a thousand projects have been implemented, with partners from all walks of life in China.Besides, some products have been exported to South Asia and the Middle East. With high-quality , advanced technology and service , it has won the trust and first choice of the industry. Up to now, the company has applied for 50+ patents, an obtained quality management system certificate S09001, environmental management system certificate S014001, occupational health and safety management system certificate OHSAS18001, high-tech enterprise certificate, high-tech product certificate (5 items) etc.

The technologies of ACCUVON pumps are mainly used in petrochemical industry, sewage treatment, railway vacuum discharge system, biogas energy, food waste, ship ocean, pulp and paper, light industry etc.