Air Cooled R22 Refrigeration Condenser Unit For Coolroom CP Series

CP SERIES AIR COOLED CONDENSER

1. Product Description:

CP series condenser adopts flat plate structure with horizontal installation, with air inlet below and air outlet above; It is mainly used for piston parallel unit or screw unit with remote installation which has large heat exchange requirement.

The series of products have the following characteristics:

● Horizontal installation of the flat structure, single - row fan and double - row fan design.

● Casing:high quality galvanized steel plate with silver powder coating (RAL7001), with strong corrosion resistance.

● The long air duct design with integral stretch arc has good air flow effect and excellent product appearance.

● Heat exchanger end plate adopts aluminum plate, effectively protect copper tube.

● Coil:diameter φ9.5 inner thread copper pipe, pipe spacing 25×21.65 triangle arrangement, high heat exchange efficiency.

● Corrugated fins with film coated aluminum, fin spacing 2.1mm.

● Fans:Standard design 3P/380V/50Hz power supply, adopt φ500 and φ630 external rotor fan, single row fan number 1-5, double row fan number 4-10, uses 4- pole or 6 -pole speed design, can meet different noise requirements.

● Product test pressure 32bar.

● Suitable for R404A, R507A, R448A, R449A, R134a, R22 and other refrigerant.

2. Technical data sheet:

2.1 φ500 fan series

1. Heat exchange calibration: air inlet temp. 25 ℃, condensation temp. 40 ℃, temp. difference 15K, refrigerant R404A. Please check the correction factor for the heat exchange under other working conditions.

2. The noise is calibrated as the sound pressure value at a distance of 10 meters.

2.2 φ630 fan series

1. Heat exchange calibration: air inlet temp. 25℃, condensation temp. 40℃, temp. difference 15K, refrigerant R404A. Please check the correction factor for the heat exchange under other working conditions.

2. The noise is calibrated as the sound pressure value at a distance of 10 meters.

3.How to select correct evaparator:

Generally,Choose evaporator capacity=cold room cooling capacity *1.15

1.When the cold room temperature is around 0℃, select 4.5mm as fin space.

Evaporator choose=1.0*Q0

2.When the cold room temperature is around -18℃, select 6mm as fin space.

Evaparator choose=1.1*Q0

3.When the cold room temperature is around -25℃, select 9mm as fin space.

Evaparator choose=1.27*Q0

Remarks: The water defrost and hot gas defrost type are also optional.

Customized specification leave me message for details.

4.Want to know other related products?-click picture for detailed specification

5.How to assure quality? Any procedure?

Our QC department will make sure of each step

6.Do you factory?
We are factory established in 1995 and through 24years developed,welcomed by all our customers.Because of all your support now we are a big family of more than 300 people,covered 50000 square meters,and your supporting is very important of continuing our dream of eating fresh and healthy food.

7.Do you attend exhibition?

Each year we will attend domestic national and foreign exhibition,also we will support our agent to attend exhibition,welcome to join us.

8.Why choose us

Professional:23 years focus one thing-refrigeration equipments

Material we use sufficient

Certificate:CE, ISO, and cetiifcate of producing special pressure equipment

9.Projects reference?

10.FAQ

1, Q:Where is your factory address?

A:We are factory and located in refrigeration equipment producing base Shengzhou,Zhejiang province.

2, Q: What is your package?

A: Our package comply to custom require not include original wood.

3, Q:What is your MOQ?

A: Ordinary products can order from 1 set.

4, Q: Can you offer sample?

A: Yes,we can offer sample.and cost and delivery at your charge.

5, Q:I can't find products on your list?

A: Please contact me directly.

6,Q:How can i confirm your factory?

A: We have third party verified document of Bureau Veritas report,you can download in company page or leave me message to get.