DS200CTBAG1ADD GE Analog Termination Module Mark V Ge Turbine Control

DS200CTBAG1ADD GE Analog Termination Module Mark V Ge Turbine Control

Product Details:

The DS200CTBAG1ADD is a terminal board designed for use within the GE Mark V Speedtronic system. The Speedtronic line was created by

General Electric for the control of both large and small gas and steam turbine systems. The MKV can be designed with either Simplex or

TMR/triple modular redundant architecture to meet the needs of the connected turbine system.

The DS200CTBAG1ADD is a long, narrow board with only a few types of components. It is drilled at each corner and along its long edges to allow

for mounting hardware and other connections. Two of these drill holes are ringed with a conductive material. The board is marked with identifying

codes including the board ID number and the company logo.

The DS200CTBAG1ADD is an Analog Termination Module. It is typically located within the <R5> core. The board has multiple connectors,

including two COREBUS connectors (JAI and JAJ.) The DS200CTBAG1ADD has two double-stack terminal strips located on one long board

edge with multiple connectors on each terminal strip. There are five vertical pin cable connectors, two vertical pin header connectors, and a 9-pin

male serial connector.

Other components on the DS200CTBAG1ADD include resistor network arrays, relays, transistors, over twenty metal oxide varistors (MOVs,) over

a dozen jumper switches, along with a number of capacitors and resistors.

Sumset International Trading Co.,Ltd Is A Professional Supplier For Industrial Automation Spare Parts.

We specialize in PLC modules, DCS control cards, ESD control cards, turbine supervisory, vibration monitoring and asset protection system.

We Are The World's Leading Industrial Equipment Supplier, Specializing In The Production Of Automation Control System Modules And Spare

Parts For Several Years. We Purchase From Factories Of World Famous Brands, Such As Konnad (General Agent In China), Bently Nevada, ABB,

Invensys Triconex, GE Fanuc, Foxboro, Emerson, Epro, Schneider Modicon, Westinghouse, Siemens, Woodward, Hima, Yaskawa, Bosch

Rexroth, Rosemount, Etc.

Many products in stock and the warranty is 1 year

Rockwell Allen-Bradley:
SLC500: 1747/1746 series
MicroLogix: 1761/1763/1762/1766/1764 series
CompactLogix: 1769/1768 series
Logix5000: 1756/1789/1794/1760/1788 series
PLC-5: 1771/1785 series

ABB:
AC800M series module,Industrial robots spare parts DSQCseries ,Bailey INFI
90,800xA,Advant OCS with
Master Software, with MOD 300software Advant OCS, Freelance - Distributed
Control System for Process Industry, Symphony Melody, Satt OCS, Symphony DCI
System Six, Harmony/INFI 90,Security system

GE:
IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module ,Communication
module ,Analog digital module
EX2100,EX2000 Excitation system card ,IS200 series DS200 series

Bently Nevada:
3500/3300 Surveillance protection syste,Proximitor eddy current sensor probe

EPRO:
PR6422/PR6423/PR6424/PR6426 eddy-current transducer,PR9268series
Electrodynamic absolute vibration sensor MMS6000 system

Emerson:
DeltaV system Dual - channel redundant security system Redundant controller
Power supply module I/O unit Analog AImodules Analog AO modules

Woodward:
SPC valve position controller 505/505E(9907-162, 9907-164, 9907-165, 9907-
167)digital controller, 2301A controller, 9905 series, 2301D-ST series

Yokogawa:
CS3000 system CPU control module, Analog module

Honeywell:
Alcont,Experion LS,Experion PKS,Experion HS,Plant Scape
TDC 2000,TDC3000,TPS,security system

Westinghouse:
OVATION system,WDPF system,WEStation

Invensys Triconex:
Redundant fault-tolerant control system,the most modern fault-tolerant controller
based on triple-module redundancy (TMR) architecture

Invensys Foxboro:
I/A Series system,FBM(input / output modules) sequential control,Ladder logic
control, Accident recall processing,Digital-to-analog conversion,Input / output signal
processing,Data communication and processing