

Add to Cart
Chicken Waste Compost Shredder Bio Fertilizer Semi Wet Fertilizer Crusher Machine
The allowable value of the semi-wet material crusher for the
biological fermented organic fertilizer material reaches 25-50%,
which can shorten the production cycle of organic fertilizer and
mixed fertilizer,greatly save the cost, is an indispensable
equipment for the organic fertilizer production line.
The semi-wet material crusher can be adjusted within a certain
range according to the crushing degree required by the user.
The crushed material can be finer in size and can reach less than 3
mm. The semi-wet material crusher has low requirements on
materials,and the moisture range can reach 35%, especially for the
fermented organic matter.
Model | Power(kw) | Capacity(t/h) | Crushing Granularity(mesh) | Inlet Size(mm) | Dimensions(mm) |
TDSF-40 | 22 | 1-1.5 | 50 | 400*240 | 1200*1350*900 |
TDSF-40Ⅱ | 22*2 | 1-1.5 | 80 | 400*240 | 1250*1600*1300 |
TDSF-60 | 30 | 1.5-3 | 50 | 500*300 | 1300*1450*1300 |
TDSF-60Ⅱ | 30*2 | 1.5-3 | 80 | 500*300 | 1500*2150*1920 |
TDSF-90 | 37 | 3-5 | 50 | 550*410 | 1800*1550*1700 |
TDSF-120 | 75 | 5-8 | 50 | 650*500 | 2100*2600*2130 |
Characteristics of Performance:
1.Wide application and high reliability. This machine does not have
the bottom with screen, so more than 100 kinds of materials can be
crushed and the machine will never blocked.
2.Simple maintenance. This machine adopts the two-way gap
technology. If the hammer is worn, then the hammer can be used
again after moving its position.
3.Good crushing effect. The machine uses the two-stage pulverized
rotor, and the material first is crushed into small particles and
then crushed into fine dust.
4.Saving labor, and the operation is simple. It uses high-tech
technology, only one person can operate easily, not only is safe
and reliable, but also facilitate maintenance.
FAQ:
Q: Can I use this production line to produce multi granularity
particles?
Yes, our production line is multifunctional. We can customize ring
moulds of different sizes. In this way, you can easily adjust the
size of your ball.
Q: I know little about the fertilizer production line. How to
choose the most suitable machine?
Just tell us your raw materials, capacity (tons / hour) and the
size of the final particle product, and we will choose the machine
for you according to your specific situation.
Q: Our workers don't know how to operate the production line. What
should I do?
Our engineers will guide on-site workers on how to install machines
and build workshops. Then, our engineers will test the production
line on site and train your workers how to operate it.
Q: Are you a trading company or a manufacturer?
We have a large factory in Jiaozuo, China, covering an area of
10000 square meters. Welcome to visit.
Q: What's the Production Period of the Fertilizer Machine?
For single fertilizer machine, our production time is 7 days;and
for whole fertilizer production line, our production time is no
more than 30 days.
Q: What's the Quality Guarantee and Certifications?
all of our machine have passed ISO and CE certification, we can
guarantee the highest quality and our warranty time is 5 years
after shipment date.