Registered Embossed Click Lock Spc Flooring For Bathroom And Toilet 5.5mm

Brand Name:UTOP
Certification:CE/SGS/Floorscore/ISO14001/ISO9001
Model Number:UTOP SPC FLOORING WOOD DESIGN 1136
Minimum Order Quantity:3300sq.ft
Delivery Time:14-31 work days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now

Add to Cart

Verified Supplier
Location: Shijiazhuang Hebei China
Address: ROOM 1006, NO. 001, CAIJIN BUILDING, NO.598 ZHONGSHAN EAST ROAD, CHANG'AN DISTRICT, SHIJIAZHUANG CITY, HEBEI PROVINCE
Supplier`s last login times: within 23 hours
Product Details Company Profile
Product Details

Click Lock 100% Waterproof Spc Flooring For Bathroom And Toilet


Made of 100% recycle natural limestone powder and virgin PVC, all UTOP SPC flooring does not contain heavy metals, phthalate, methanol and other harmful substances.It will not do harm to the environment and human body.


Edge DetailSquared edge & Beveled edge available
Place of OriginShijiazhuang, China
UsageIndoor
Product TypeSPC Flooring
FeatureWaterproof Wear Resistant Anti-slip
Surface TreatmentUV coating
InstallationClick Lock
CertificateCE / SGS / ISO9001
Surface TextureWood Texture
Crystal Texture
Deep embossed Texture
Registered embossed
Warranty20 years for residential
15 years for commercial

100% Waterproof



As the SPC vinyl layer is completely waterproof, therefore,SPC flooring has excellent waterproof and dampproof performances. Mildew will not happen on SPC flooring and keep your floor as good as new. As a result, it is widely used in laundry rooms, bathrooms, basements and kitchens.


Excellent Durability



We offer a 25-year warranty for our residential SPC flooring and a 10-year warranty for our commercial SPC flooring. All our SPC flooring is provided with a wear layer that can withstand about 10,000 wear-resisting revolutions and higher. It ensures our SPC flooring works well in both residential and commercial environments.


Installation steps


Precautions before installation


· SPC floor should be leveled and placed on site with constant temperature and stability for 24 hours before installation;


· Make sure the floor is smooth and clean before installing the floor, without any residue;


· When installing the floor, the indoor temperature should be kept between 15 and 28 degrees Celsius.Indoor temperature and surface temperature 15 are appropriate, and should not be applied below 5 and above 30. The relative air humidity suitable for construction should be between 20% and 75%.


· The moisture content of the base layer should be less than 3%. The strength of the base layer should not be lower than the requirement of concrete strength C-20, otherwise suitable self-lev-eling should be used to strengthen the strength. The surface hardness of the base layer is not less than 1.2 MPa.



1. Before installation, it is recommended to spread floor film, which can make better feeling of feet and prevent the noise generated between the ground and the floor by small grains of sand. Put the first floor from the left corner of the room.


2. To prevent the natural expansion of the floor, 0.4 cm gap should be reserved between the wall and the floor.


3. When installing the first and second floor, insert the convex damage of the short side into the groove of the first floor,Continue to use the above method to install other floors...


4. When installing the last piece of the first row, you need to take the remaining part of the floor measure-ment first, and note that the floor needs to be measured in reverse.


5. Finally, use the art knife to force the floor surface, break it by hands easily, then install the last floor of the first row.


6. Start installing the second row,When installing the second floor, insert the convex of the short side into the groove of the previous floor, and gently insert the convex of the long side into the corresponding floor groove.


7. Use a rubber hammer when there are gaps.


8. Recommended installation method reference picture.


9. Finally, the same method can be used to install other floors in the room to ensure that necessary expansion gaps are left between all fixed vertical planes in the room, including doors, walls, cabinets and other fixed objects.

China Registered Embossed Click Lock Spc Flooring For Bathroom And Toilet 5.5mm supplier

Registered Embossed Click Lock Spc Flooring For Bathroom And Toilet 5.5mm

Inquiry Cart 0