Product Details
EN 1.4477 Stainless Steel Plate 0.6 - 40.0mm 329 Stainless Steel
X2CrNiMo29-7-2 SS Plate
Specification of our EN 1.4477 Stainless Steel Plate
Products | EN1.4477 Stainless Steel Plate Sheet |
Thickness | cold rolled 0.4 - 5.0mm |
hot rolled 3.0 - 100mm |
Width | cold rolled 1000mm 1219mm 1500mm |
hot rolled 1500mm 1800mm 2000mm |
Surface | 2B BA NO.1 NO.4 8K HL |
Brand | TISCO BAOSTEEL POSCO JISCO |
Equal Grade | 329 / X2CrNiMo29-7-2 |
Other Grade | 201 202 304 309S 310S 316L 321 347 410 420 430 2205 2507 904L
254SMO.etc |
Standard | EN 10088-2 ASTM A240 JIS G4303 |
Service | Cutting , Surface Finishing |
MOQ | 500 kgs |
Packing | Wooden pallets and waterproof paper |
Loading Port | Shanghai Port,China |
FCL Qty | 25 Tons each 20ft and 40ft container |
EN 1.4477 stainless steel is a duplex stainless steel formulated
for primary forming into wrought products. 1.4477 is the EN numeric
designation for this material. X2CrNiMoN29-7-2 is the EN chemical
designation.
It can have a fairly high tensile strength among wrought duplex
stainless steels. In addition, it has a fairly low thermal
conductivity and can have a moderately low ductility.
The properties of EN 1.4477 stainless steel include two common
variations. This page shows summary ranges across both of them. For
more specific values, follow the links immediately below. The graph
bars on the material properties cards further below compare EN
1.4477 stainless steel to: wrought duplex stainless steels (top),
all iron alloys (middle), and the entire database (bottom). A full
bar means this is the highest value in the relevant set. A
half-full bar means it's 50% of the highest, and so on.
EN 1.4477 Stainless Steel Sheet
- Standard Stock Sizes: 1ft x 4ft, 2ft x 2ft, 2ft x 4ft, 4ft x 4ft,
4ft x 8ft, 4ft x 10ft or Cut to Size.
- Thickness: 0.25mm-100mm
- Width: 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm,
3500mm, etc
- Length: 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
- Surface: 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered,
embossed, hair line, sand blast, Brush, etching, etc
- Finish: Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA
NO(8), SATIN (Met with Plastic Coated)
CHEMICAL COMPOSITION (WEIGHT %)
C(%): ≤0.030
Si(%)≤: 0.50
Mn(%)≤: 0.80~1.50
P(%)≤: 0.030
S(%)≤: 0.015
Cr(%): 28.0~30.0
Ni(%): 5.80~7.50
Mo(%): 1.50~2.60
Other(%): N0.30~0.40,Cu≤0.80
MECHANICAL PROPERTIES ( FINAL HEAT TREATMENT OR Q/T) UNDER ROOM
TEMPERATURE
Condition: solution treatment
Thickness/mm: 160
σb/MPa: 740
σ0.2≥/MPa: 550
δ5≥(%): 15
ψ≥(%): -
Akv≥/J: 90
Hardness HBS30: -
- Medical equipment
- Chemical equipments
- Mechanical parts used in the condition of corrosion resistance
- Bolt and nut
- Pressure vessel
Products Show
Company Profile
Our company is located in Wuxi City, China, we are a stainless
steel plate, seamless steel pipe, round steel, steel belt,
decorative pipe and other products distribution wholesale private
enterprise. Our company operates stainless steel plate, seamless
steel pipe, round steel, steel belt, decorative pipe best-selling
consumer market. Without our products among consumers enjoy a
higher status, the company with a number of retailers and agents to
establish a long-term stable cooperative relationship. Our
distribution of stainless steel plate, seamless steel pipe, round
steel, steel belt, decorative pipe variety complete, reasonable
price. The strength of the company, heavy credit, abide by the
contract, ensure product quality, with a variety of management
characteristics and the principle of small profits, to win the
trust of our customers.