2. Major technical specifications:
Features | KL4.5LM Specifications |
Rated capability | 4.5Ah(li-ion battery) |
Rated voltage | 3.7V |
Continuous discharging time | >15h |
Main light LED Working voltage | 3.2V |
Main light LED Working current | 0.35A |
Main light Power | 3W |
Main light Luminous flux | >100Lm |
lamp lighting degree (distance 1 meter) | >8500Lux (at the starting time) >6000Lux (after 10 hours working time) |
Main light Usage life hour | >30000h |
Weight | <210g |
Accessory light Usage life hour | 100000h |
Short circuit protect time | <15ms |
Usage duration of battery (recharges) | 1000 recharges (in reasonable working condition) |
Charging time | ≤ 8hours |
Charing voltage and current | 5V@1000mA |
3. Operation procedure
3.1
Main LED and backup LED ON/OFF : Press lamp button( a lamp mark on
the button)
one time , Main LED on , Press Lamp button again , Main LED off ,
backup LED on ,
Press lamp button again , back LED off . press lamp button for next
cycle.
3.2
Display cap lamp number, time ,capacity : Press clock button( a
clock mark on the
button) one time, display lamp number , Press clock button again ,
display current
time, Press clock button again , display current battery capacity
(four squares is full ,
three squares means 3/4 capacity , two means 1/2 capacity, one
means 1/4 capacity,
one square blink per 20 sec. Means have to be charged again and the
battery
capacity only can light for about one hour) , press clock button
again , all LED digit off ,
if there are no button be pressed , after 20 sec. The LED digit
will automatically turn
off.
3.3
Clock set : Press clock button and hold about 3 sec.s , the hour
will blink , release
clock button , press lamp button to set the hour , press clock
button again , minute
high bit will blink , press lamp button to set the minute high bit
, press clock button
again , minute low bit will blink , press lamp button to set the
minute low bit, press
clock button again to confirm and finish clock setting.
3.4
Cap lamp number set : For management of enterprises only ,ask agent
for help.
4
Charging :
4.1
Charger input: AC100-240V 50-60Hz , 0.3A
4.2
Charger output : DC 5V@1000mA
4.3
Manufacturer provide charger to user , please use it only
4.4
When long-term storage is needed , charging should be done within
two months.