Battery Insulation Pad Thermal Management System In Electric Vehicles Battery Insulation
Brand Name:FQ
Certification:IATF16949
Model Number:MPP 01
Minimum Order Quantity:Customized
Delivery Time:1000 pcs/ days
Payment Terms:L/C, T/T, D/P
Contact Now
Add to Cart
Active Member
Address:
No. 188, Wuchen Road, Dongtai Industrial Park, Qingkou Town, Minhou County
Supplier`s last login times:
within 2 hours
Product Details
Company Profile
Product Details
Battery Thermal Management System Compressive Pad TDS compressive stress FR-MPP Foam Sheet
Description
At present, the fireproof materials for battery packs of new energy
vehicles are mainly fireproof felt materials, such as heat
insulation blankets, mica boards, ultra-fine glass wool,
high-silica cotton felts, etc. Although the fireproof blanket can
effectively prevent the heat from spreading, control the direction
of the fire, and delay the heat diffusion time, the use of
fireproof blankets also brings about a weight problem, poor heat
dissipation performance, and limitations in the design and
construction process. Which hinder the development of lightweight
automobiles. Therefore, materials of light weight and excellent
flame-retardant are the first choice for EV battery protection.
As to this purpose, #Shincell’s supercritical foamed #MPP and
#FR-MPP are used as battery buffers for new energy batteries. It
has excellent properties such as lightweight, low thermal
conductivity, good cushioning performance, flame-retardant without
toxic gas, nonabsorbency, high volume resistivity and Long-term
aging resistance.
- Lightweight
- Flat sides
- Self-adhesive
Features
- Lightweight and high strength
- Clean and environmentally friendly
- Good cushioning protection performance
- Good surface protection performance
- Good waterproof performance
- Good thermal insulation performance
- Good chemical resistance
- Recyclable
Specification
The main performance parameters are shown in Table
| Property Name | Unit | MPP25 Index | Test Standard |
| Colour | / | CMYK 0~20(White) | PANTONE |
| Density | kg/m3 | 36±5 | initial Thickness Detection Using The Mitutoyo 547-301 Thickness Gauge; By Weight, Volume Calculate Density; |
| Compression Curve | MPa | 10%:0.11≤σ≤0.24 20%:0.14≤σ≤0.34 30%:0.17≤σ≤0.38 40%:0.22≤σ≤0.42 50%:0.28≤σ≤0.47 60%:0.34≤σ≤0.54 70%:0.44≤σ≤0.67 | compression Rate 2mm/min 0.02~8mpa Compression Curve Sample Size 50*50*2mm |
| Tensile Strength | MPa | ≥1.3 | astm-d3574- 08 5mm/min (stretch Rate) |
| Tensile Modulus | MPa | ≥2.8 | |
| Shear Strength | MPa | ≥1.1 | astm C273c 273m 5mm/min (shear Rate) |
| Shear Stiffness | MPa/ mm | ≥0.6 | astm C273c 273m 5mm/min (shear Rate) |
| Shear Modulus | MPa | ≥1.2 | astm C273c 273m 5mm/min (shear Rate) |
| low-Temperature Stretching -30℃ | MPa | ≥1.2 | astm-d3574- 08 5mm/min (stretch Rate) |
| high-Temperature Stretching 60℃ | MPa | ≥1.0 | astm-d3574- 08 5mm/min (stretch Rate) |
| Double 85 Stretched After Aging | MPa | >1.2 | astm-d3574- 08 5mm/min (stretch Rate) |
| coefficient Of Friction Of Mpp To Blue Film | / | 0.181≤μs≤0.577 0.112≤μk≤0.535 | Gb 10006-88 |
| Roughness | μm | 5~40 | gb/t 1031-2009 |
| Flame Retardant | / | UL94 HF-1 ( Thickness 10mm) | Ul94 |
| Prohibited Objects | / | RoHS | Rohs |
| Insulation Resistance | MΩ | ≥500 | 1000v Dc 60s |
| mA | ＜1 | 2700v/60s | |
| Thermal Conductivity | W/(m·℃) | ≤0.05 | gb/t 10295-2008 |
| Specific Heat Capacity | J/(kg·℃) | 1880±200 (@0℃) 2235±200 (@40℃) 2680±200 (@80℃) | Astm E1269-2011 |
| Hard Stiffness | mm | ≤50 | "The sample (250*50*2mm) is placed flat on the high platform, 50mm at one end is fixed on the platform, and the other end is 200mm suspended to detect the suspended end End sag height" |
| Compressive Stress Retention Rate | / | ≥20% | compress 50% Hold 30 Days, and Detect Pressure Changes |
| Flatness | mm | ≤4 | dimensions: 100*150 Mm |
Flame retardant test results
| Test Item | Test Method | Unit | Multiplier | |||
| 10P | 15P | 20P | 25P | |||
| Density | ISO 845:2006 | kg/m³ | 90 | 60 | 45 | 36 |
| Compressive Strength 10% | GB/T8813-2008 | MPa | 0.56 | 0.36 | 0.3 | 0.23 |
| Bending Strength | GB-T 8812.2-2007 | MPa | 0.9 | 0.68 | 0.44 | 0.36 |
| Bending Modulus | GB-T 8812.2-2007 | MPa | 49 | 33 | 24 | 18 |
| Hardness | SHORE C | HC | 81 | 75 | 66 | 55 |
MPP15:
Density: 0.06 g/cm³
Hardness: 75 HC
Application: Bulletproof vest, Model Aviation, Slippers, Backpack
MPP20:
Density: 0.045 g/cm³
Hardness: 66 HC
Application: Bulletproof vest, Model Aviation, Slippers, Backpack
Application
- Battery Pack
- Model aeroplane
- Slippers
- Bulletproof vest
- Backpack
- Pipe insulation
Package & Delivery
Battery Insulation Pad Thermal Management System In Electric Vehicles Battery Insulation
Inquiry Cart
0