1.Introduction:
HDPE Geomembrane made from polyethylene polymer materials, through
blowing or extruding technology, ASTM/GB standards available. Our
thickness ranges from 0.2-3mm; smooth, textured or bi-color
surfaces available. HDPE Geomembrane main function is to prevent
the liquid leakage and gas volatile. It is widely used in lining of
pond reservoirs, canal, waste water, landfill, dams, Lakes, fish
ponds and many other areas because HDPE Geomembrane is cost
effectiveness and resistance against chemical and weather
conditions.
2.Our advantages:
New raw material and the precise formula;
Advanced equipment, perfect production process;
Real-time detection, strict quality control staff;
The packaging is solid to ensure the safety of the goods in
delivery.
3.Application:
1. Prevent leakage disposal in landfills, waste water, or in waste
dregs disposing field.
2. Retain river bank, lake dam, mine, reservoir, tunnel. Working as
liquid storage pools.
3. Prevent leakage in subway, basement, tunnel. Also, it prevents
anti-salt leakage in roadbed, and other projects.
4. The plane and the vertical direction laying of dam and ground
sill, LLDPE Geomembrane Liner is used in the construction fence and
waste material fields.
5. Used in ground sill of road, highway, railway, and waterproof
layer of swelling clay.
6. Prevent leakage on rooftop.
Product Features
1. Good physical and mechanic performance.2. High tearing resistance, strong deformation adptability.
3. Corrosion resistance, aging resistance.
4. Good adaptability to high and low temperature, non-toxicity, long
service life.
5. Good waterproof, drainage, anti-seepage and damp proof effects.
6. Complete width and thickness specifications, low cost and easy
installation.
Construction Method
1. The slope shall be laid in order from top to bottom. Don't pull
it too tight.
2. Tow adjacent longitudinal joints should not be in a horizontal
line, should bestaggered more than 1m each other.
3. Longitudinal joints should be more than 1.50m away from the dam
foot and bending foot, and should be located on the plane.
4. When the slope is laid, the direction of spreading film should
be basically parallel to the slope line.
5. The construction, first of all to use small diameter sand or
clay levelingbase, and then laid the geomembrane. The geomembrane
should not be stretched too tight, and the part of the soil bured
at both ends is corrugated. A transitional layer of about 10cm is
laid on the geomembrane with sand or clay.
Professional geosynthetics manufacturer
Anhui Zhonglu Engineer Materials Co., Ltd
Angela:86-18095658976