

Add to Cart
100% Virgin Black Smooth Texture Perforated Geoweb Honeycomb Gravel Grid Soil Stabilizer Plastic Geocell
Geoweb Honeycomb Gravel Grid Soil Stabilizer Plastic Geocell Description:
HDPE Geocell is made by welding the strengthened HDPE sheets by a high-power
ultrasonic. We can produce surfaces like smooth, texture or
perforated. It is a structure of three-dimension product.
HDPE Geocell is easily folding and convenient for transportation. When
construction, the HDPE geocell can be working as a network and will
be launched into a three-dimensional honeycomb grid. HDPE Geocell
has strong sidewise restraint and high rate of stiffness.
It is light materials, wear-resistant, chemically stable,
photo-oxidation, acid and alkali, suitable for different soils and
soil conditions such as desert. Besides, it has High lateral
limitations and non-slip, deformation, effectively enhancing
subgrade's bearing capacity and distributed loads.
HDPE plastic honeycomb hdpe geocell gravel grid Features:
1) Light material , resistant to wear , stable in chemical
properties , anti-aging , resistant to acids and alkalis,
applicable to different soil and desert and other geological
conditions .
2)High limit on lateral direction , anti-skidding ,
anti-deformation , effectively enhance the supporting ability and
scattered load function of roadbed .
3)High carrying capacity and good dynamic performance and high
erosion ability .
4)The geometry size can be changed to meet different needs of the
project , such as height and welding distance
5)Retractable and small loading volume , convenient joint , speed
construction .
6)Local material can be used during construction , reduce the
construction cost , easy to be transported after folding together.
Material Properties | Unit | Test Method | |||||
Cell Depth | mm | 75 | 100 | 150 | 200 | ||
Polymer Density | g/cm3 | 0.935-0.965 | ASTM D 1505 | ||||
Environmental Stress Crack Resistance | Hours | >400 | ASTM D 5397 | ||||
Environmental Stress Crack Resistance | Hours | 6000 | ASTM D 1693 | ||||
Carbon Black Content | % | 1.5% - 2.0% | ASTM D 1603 | ||||
Nominal Sheet Thickness Before Texturing | mm | 1.27 -5%,+10% | ASTM D 5199 | ||||
Nominal Sheet Thickness After Texturing | mm | 1.52-5%,+10% | ASTM D 5199 | ||||
Strip Puncture Resistance | N | 450 | ASTM D 4833 | ||||
Seam Peel Strength | N | 1065 | 1420 | 2130 | 2840 | EN ISO13426-1B | |
Seam Efficiency | % | 100 | GRI-GS13 | ||||
Nominal Expanded Cell Size (width x length) | mm | 320x287,475x508 etc | |||||
Nominal Expanded Panel Size (width x length) | m | 2.56x8.35, 4.5x5.0, 6.5x4.5, 6.1x2.44 |
FEATURES:
1. High Grade Raw Material to Ensure the Product Performance
Use virgin HDPE material to assure consistent, reproducible, and
long-lasting performance.
2. Ultrasonic Wedling to Ensure the Strength of the Seam
Strong weld continually tested to project assurance.
3. Honeycomb Structure to Bearing Heavy Load
Prevent horizontal movement, and increase both shear strength and
bearing capacity.
4. Proformed Hole to Allow Water to Get Through
Prevents erosion, and allow water flow.
HDPE Geocell Application:
Geocell Packing: