Product Details
Rohde and Schwarz CMS57 Radio communication service monitor with
VOR/ILS generator
Description of R&S CMS57 Analyzer
Measuring facilities
Filters
Other facilities
- RF synthesizer from 0.4 to 1000 MHz, resolution 10 Hz, with AM, FM,
φM and multitone modulation capabilities
- Two independent modulation generators, from 20 Hz to 30 kHz each,
resolution 0.1 Hz
- Selective-call encoder to all standards (also user-programmable)
- CDCSS coder
- DTMF coder
- 10 MHz reference frequency input/output
- VOR/ILS signal generator
- RF frequency counter, RF frequency-offset counter
- Power meter from 5 mW to 100 W
- Selective RF power meter down to -100 dBm
- RF spectrum monitor with wide dynamic range and filters which also
allow modulation analysis (AM, FM, SSB)
- Tracking generator in frequency range from 400 kHz to 1000 MHz
- Adjacent-channel power meter with standard ETSI filters
- Modulation meter for AM, FM and jM; weighting: +PK, -PK, PK HOLD,
PK/2, RMS, RMS2
- Duplex modulation meter for duplex spacings of any size
- AF voltmeter with peak and true RMS weighting
- SINAD meter with variable test frequency
- S/N meter
- Distortion meter with variable test frequency
- AF frequency counter with period and gate-time counting
- Selective-call decoder for all standards (also user-programmable)
- DTMF decoder
- CDCSS decoder
- Oscilloscope
- DC ammeter/voltmeter
- Transient recorder for analysis of power and frequency transients
- Cable fault test
- CCITT or C-message filters for weighting to relevant standards
- Continuously tunable bandpass filter from 50 Hz to 5 kHz with high
skirt selectivity for selective modulation and AF measurement
- Continuously tunable notch filter from 100 Hz to 5 kHz for signal
suppression
- Highpass and lowpass filters for band limiting and measurement of
subaudio tones
- Second RF input with high sensitivity for off-air measurements, can
be used independently for module testing
- Built-in 600 Ω AF transformers for modulation generator and AF
voltmeter
- Connector for battery (11 V to 32 V)
- 13 dBm RF output for off-air measurements
- Memory for storing complete instrument setups
List of Options
| B1 | OCXO reference oscillator, aging : 2*10E-7/year |
| B2 | OCXO reference oscillator aging: 1*10E-7/year |
| B22 | 10 MHz ref. Frequency input/output |
| B31 | Additional RF in/output |
| B32 | 100 W RF power meter |
| B33 | 300 Hz low-pass filter for CMS-B5(models 06,10,12) and CMS-B55 |
| B34 | 13 dBm output (additional BNC output) |
| B5 | Control interface with CCITT filter, DTMF decoder and Centronics
interface |
| B55 | Centronics interface CCITT filter and DTMF decoder, instead of
CMS-B5 |
| B60 | Protection for input 2 with replaceable fuse (for new CMS52/54/57
only) |
| B9 | Duplex modulation meter for CMS55/57 with ACP meter and tracking |
| DCV-2 | Documentation of calibration values |
| DCV-ZP | Printout of DCV (additional, in combination with DCV-Option only) |
| DKD | CMS DKD (ISO17025) calibration incl. ISO 9000 calibration (order
only with device) |
| Z2 | Accessory: Memory card, 128 KB |
| Z37 | Accessory for CMS: Adapter for VSWR sensors NAS-Z1/-Z3/-Z5/-Z6 and
-Z7 |
| Z40 | Accessory for CMS: Carrier bag |
| Z41 | Accessory for CMS: Battery pack with charger |
| Z7 | Accessory: Battery connector for external DC power supply |
Our service
One-stop service from manufacture to shipping.
1. Your inquiry related to our products or prices will be replied
in 24hours.
2. Well-trained and experienced staffs to answer all your enquires
influent English.
3. Distributor ship is offered for your unique desigh and some our
current models.
4. Protection of your sales area, ideas of design and all your
private information.
FAQ
1.Can you ship order to Canada or Australia ?
Yes,we can .We send orders worldwide .
2. What delivery method do you use ? and delivery time ?
We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual
delivery time is 4-7 workdays.
3. What is your payment term?
100% T/T payment before shipment.
4. How can I ask any other question ?
You can contact us online or leave us messages below.
Company Profile
Meigaolan is a test and measurement solutions and production
suppliers, founded in 2003 and located in Shenzhen,China.
Our highly skilled Sale Representatives can assist you with all of
your
new and refurbished test equipment needs, providing EMC test
solutions
and building your Anechoic chamber.
We own 7 repair labs in China

Warehouses all over China


Business partners
