Rohde & Schwarz ZVH4 Portable Cable Analyzer Antenna Analyzer 2.0 Port N-Type Connector ZVH4
Brand Name:Rohde & Schwarz
Certification:ISO17025
Model Number:ZVH
Minimum Order Quantity:1 set
Delivery Time:1~3 Working Days
Payment Terms:T/T，Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
RA1-B2,F32 of Dongjianghaoyuan, Baomin Rd, Bao'an District, Shenzhen,China
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
KEY FACTS OF Rohde & Schwarz ZVH4 Portable Cable Analyzer
► Frequency range from 100 kHz to 3.6 GHz or 8 GHz
► 100 dB (typ.) dynamic range for filter and antenna isolation
measurements
► Factory calibration over entire frequency range
► Built-in DC voltage supply (bias) for active components such as
amplifiers
► Power meter option
► Saving of measurement results on SD memory card or USB memory
stick
► Easy operation with user-configurable test sequences (wizard)
► Easy-to-replace Lithium-ion battery for up to 4.5 h of operation
► Rugged, splash-proof housing for rough work in the field
► Easy handling due to low weight (3 kg with battery) and
easy-to-reach function keys
BENEFITS AND KEY FEATURES OF Rohde & Schwarz ZVH4 Portable
Cable Analyzer
Installation of antenna systems
► Distance-to-fault measurements (DTF)
► One-port cable loss measurements
► Reflection measurement
► Transmission measurements
► Built-in DC voltage supply
► Position finding using GPS receiver
► Factory calibration of the R&S®ZVH
Maintenance of antenna systems
► Two-port vector network analysis
► Vector voltmeter
► Terminating and directional power measurements
► Pulse analysis with wideband power sensors
► Internal channel power meter
► Spectrum analysis measurements
► Spectrogram measurements
Easy operation
► Test report in just a few steps using the
R&S®ZVH wizard
► Channel tables for frequency setting
► Optimal reading of measurement results in any situation
► Operation in different languages
► Easy-to-access, well-protected connectors
Documentation and remote control
► R&S®InstrumentView software for documenting
measurement results
► Remote control via LAN or USB
Specifications of Rohde & Schwarz ZVH4 Portable Cable Analyzer
Frequency
| Frequency range | R&S®ZVH4 | 100kHzto3.6GHz |
| R&S®ZVH8 | 100kHzto8GHz | |
| Frequency resolution | 1Hz | |
| Reference frequency, Internal | ||
| Total reference accuracy | ± (time since last adjustment × aging rate) | |
| + temperature drift + calibration accuracy | ||
| Aging per year | ±1 × 10-6 | |
| Temperature drift | 0 °C to + 50 °C ¹ | ±1 × 10-6 |
| Achievable initial calibration accuracy | ±5 × 10-7 | |
| Reference frequency, with R&S®HA-Z240 GPS receiver option | ||
| Frequency accuracy | GPS on, ≥ 1 min after satellite lock | ±2.5 × 10–8 |
| up to 30 min after losing satellite lock | ±5 × 10–8 | |
| Reference frequency, with R&S®FSH-Z114 precision frequency reference option | ||
| Aging per year | 3.6 × 10–9 | |
| Temperature drift | 0 °C to + 50 °C | 4 × 10–10 |
| Achievable initial calibration accuracy | 1 × 10–9 | |
| Total reference uncertainty | R&S®FSH-Z114 connected | |
| ≥ 30 s after oscillator lock | (time since last adjustment × aging rate) + temperature drift + 3 × calibration accuracy (nominal) | |
| ≥ 2 min after oscillator lock | (time since last adjustment × aging rate) + temperature drift + calibration accuracy | |
| Frequency readout | ||
| Marker resolution | 0.1Hz | |
| Accuracy | ± (marker frequency × reference accuracy) + 10% × measurement bandwidth + ½((fstop–fstart) / (data points – 1) + 1 Hz) | |
Measurement
| Individual measurements | reflection (S11, S22) | |
| with R&S®ZVH-K39 option | transmission (S21,S12) | |
| one-port cable loss | ||
| distance-to-fault | ||
| Measurement Wizard | ||
| Guides the user through a sequence of individual measurements, uses
the R&S®InstrumentView PC software to configure the measurement
sequence including hints displayed on the screen; R&S®InstrumentView is also used to combine the measurement results into user-configurable reports. | ||
| Measurement set up | ||
| Port output power | controlled via tracking generator attenuation | 0 dBm to – 40 dBm (nom.), in 1dB steps |
| Receive path RF attenuation | 0 dB to 30 dB in 5 dB steps | |
| Data points | selectable | 101, 201, 401, 601, 631, 801, 1001, 1201 |
| Measurement bandwidth | range | 100 Hz to 100 kHz in 1/3 sequence |
| Trace modes | clear/write average, interference | |
| suppression | ||
| DC bias | ||
| DC source | selectable | internal or external |
| Output port | selectable | port 1 or 2 |
| Output voltage | mode: internal | +12 V to + 32 V in 1 V steps |
| Maximum output power | mode: internal | |
| operatedwithbattery | 4 W | |
| operatedwithACmains | 10 W | |
| Maximumcontinuousoutputcurrent | mode: internal | 500 mA |
| Trigger | ||
| Trigger source | free run, external rise, external fall | |
| External trigger level | TTL level | |
| Reflectionmeasurement S11, S22 | ||
| Result formats | magnitude,VSWR | |
| Magnitude | ||
| Range | 1/2/5/10/20/50/100/120/150 dB, linear 100% | |
| Resolution | 0.01dB | |
| VSWR | ||
| Range | selectable | 1 to 1.5, 2, 6, 11, 21 or 71 |
| Corrected directivity | 100 kHz ≤ f ≤ 3 GHz | > 43dB (nom.) |
| 3 GHz < f ≤ 6 GHz | > 37dB (nom.) | |
| 6 GHz < f ≤ 8 GHz | > 31dB (nom.) | |
| Corrected test port match | 100 kHz ≤ f ≤ 3 GHz | > 40dB (nom.) |
| 3 GHz < f ≤ 6 GHz | > 37dB (nom.) | |
| 6 GHz < f ≤ 8 GHz | > 30dB (nom.) | |
| Measurement uncertainty | see figure “Uncertainty of reflection measurement” on page7 | |
| Transmission measurement S21, S12 (withR&S®ZVH-K39 option) | ||
| Result format | magnitude | |
| Measurement range | –120dBto+80dB | |
| Display range | selectable | 1/2/5/10/20/50/100/120/150dB, |
| linear100% | ||
| Resolution | 0.01dB | |
| Dynamic range | RF attenuation = 5dB, tracking generator level = –10 dBm, RBW = 1 kHz | |
| 100 kHz ≤ f < 300 kHz | > 50 dB (nom.) | |
| 300 kHz ≤ f < 2.5 GHz | > 80 dB,100 dB (typ.) | |
| 2.5 GHz ≤ f < 6 GHz | > 70 dB, 90 dB (typ.) | |
| 6 GHz ≤ f < 8 GHz | > 50 dB (nom.) | |
| Test port match | as specified for test port input/output | |
| Measurement uncertainty | calibration method = full two port high accuracy | see figure “Transmission magnitude uncertainty” on page 7 |
| One-port cable loss measurement | ||
| Result format | magnitude | |
| Range | selectable | 1/2/5/10/20/50/100/120/150 dB |
| Resolution | 0.01dB | |
| Distance-to-fault analysis | ||
| Result formats | return loss, VSWR (average and maximum indication) | |
| Return loss | ||
| Range | 1/2/5/10/20/50/100/120/150dB, linear100% | |
| Resolution | 0.01dB | |
| VSWR | ||
| Range | selectable | 1to1.5,2,6,11,21or71 |
| Fault resolution in meters | (1.5 × 108 × velocity factor/span) | |
| Maximum cable length | depending on cable loss | 1500 m (nom.) |
| Immunity to interference | ||
| Maximum permissible spurious signal | measurement = reflection (S11)/one-port cable loss/distance-to-fault analysis | |
| RF attenuation = 5 dB | +10 dBm (nom.) | |
| RF attenuation = 30 dB | +17 dBm (nom.) | |
FAQ:
1. Can you ship the order to Canada or Australia?
Yes, we can. We send orders worldwide.
2. What delivery method and delivery time do you use?
We can ship by EMS, DHL, FedEx, UPS, and TNT with tracking numbers. The usual delivery time is 4-7 workdays.
3. What is your payment term?
100% T/T payment before shipment.
4. How can I ask any other question?
You can contact us online or leave us messages below.
Rohde & Schwarz ZVH4 Portable Cable Analyzer Antenna Analyzer 2.0 Port N-Type Connector ZVH4
Inquiry Cart
0