Panoramic Borehole Inspection Camera 850TVL Deep Water Well Inspection Camera 2000m

Brand Name:Gold
Certification:ISO9001 CCC CE
Model Number:GYGD-IIIS
Minimum Order Quantity:1 set
Delivery Time:5-8 working days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now

Add to Cart

Verified Supplier
Supplier`s last login times: within 3 hours
Product Details Company Profile
Product Details

Panoramic Borehole Inspection Camera Deep Water Well Inspection Camera


Product Introduction


GYGD-IIIS Deep Water Well Inspection Camera is a method to monitor the change of the situation in the well on the TV screen on the ground by scanning the well hole with the TV camera.The panoramic camera can clearly observe the condition of the well wall, and can accurately find the damaged part and its cause, so that timely measures can be taken.


Application

The deep water wll inspcetion camera can be used to observe various characteristics and subtle phenomena of geological body in borehole, well, well, oil well, pile foundation, such as formation lithology, rock structure, geological structure, rock strike, fault, fissure, interlayer, karst fracture, etc. The conditions and faults in the well can be seen clearly, whether they occur on the wall or at the bottom of the well.


Technical Specification

Hole typeVertical,Slant Hole
Depth0-2000m
Camera Rsolution850TVL
PressureMax.15Mpa
Probe DiameterΦ40-Φ120mm
Cable Tensile Strength250KG
PowerAC220V50Hz(DC12/24V Optional)
LED Display8 Inch 4:3,1024*768Pixel
StorageSD Card/U Disk,Standard 16G SD Card,32G Optional
SensorSony 1/3 Inch CCD,0.1Lux

Operation Methord


1. Before use the machine, please check it first. And make sure good connection, cable is not damage, no leaks, winch work with flexible rotation
2. Install the pulley in central of well,winches and pulleys must be installed in the vertical plane.
3. Connect the parts well as photo shown
4. Plug power wire, and check the voltage. If the voltage is not same with the local, please stop the operation and check the circuit. If the power is less than 180v, the photo may be not clear, and winch may not work.
5. After good connection of every parts, turn on the voltage switch. LCD screen display, and probe light is start work.
6. Screen show the time, depth. And user can reset the depth.

7. Start winch, adjust the speed. Put the probe into well. When depth is 2-3 meter, change the direction, and take the probe out of well. Do it same 2-3 times, and make sure the system can work very well.

Product images


China Panoramic Borehole Inspection Camera 850TVL Deep Water Well Inspection Camera 2000m supplier

Panoramic Borehole Inspection Camera 850TVL Deep Water Well Inspection Camera 2000m

Inquiry Cart 0