

Add to Cart
Automatic Flute corrugated Laminator Machine
Performance characteristics
● Cardboard laminate with corrugated or cardboard laminate with
cardboard.
● Automatic detection of top and bottom paper, automatic servo
correction technology. Make the top paper automatically track and
fit the bottom paper, and the accuracy is high.
● The bottom paper feeding part use imported servo motor
controlling system, with Japan NITTA suction belt.
● Stainless steel glue roller with fine anilox grinding to
guarantee even glue coating even at min glue quantity.
● One -click adjustment of the whole machine (just enter the paper
size).
● Video monitoring (optional).
INTRODUCTION:
The servo laminating machine is the newest member of the laminating
family. This machine combines the motion control system and servo
correction device, there are multiple sets of photoelectric sensor
induce the position of the bottom sheets, and in the mean time the
servo motors on both sides of the top sheet make independent
compensation action, so the top sheet and the bottom sheet can be
positioned accurately.
SPECIFICATION:
MODEL | GFM-1450A | GFM-1650A | GFM-1900A |
Max Sheet | 1500×1500mm | 1700×1700mm | 1900×1900mm |
Min Sheet | 360×380mm | 360×400mm | 500×500mm |
Top Paper Thickness | 120-800g | 120-800g | 120-800g |
Max Speed | 150m/min | 150m/min | 150m/min |
Fitting Precision | ±1mm | ±1mm | ±1mm |
Machine Power | 22KW | 25KW | 27KW |
Bottom Paper Thickness | ≤10mm(A-F corrugated board) ≥300g cardboard | ≤10mm(A-F corrugated board) ≥300g cardboard | ≤10mm(A-F corrugated board) ≥300g cardboard |
BRANCH INTRODUCTION:
1. BOTTOM PAPER FEEDING
Use imported Servo motor electric controlling system, with Japan
NITTA suction
belt to make suction power inverter, Patented technology to ensure
corrugate and cardboard goes out smoothly and simple operation.
2. TOP SHEET FEEDING MECHANISM
Equipped with high speed auto dedicated feeder, both paper lifting
and feeding
nozzle can freely adjust angle to the paper, to ensure that whether
thick or thin
paper can be delivered rapidly and smoothly.
3. ELECTRICAL SYSTEM
Mainly using Siemens electric system to ensure machine stability,
high efficiency and low failure. Using man-machine interface and
PLC combination, display all the information on the screen.
4. PRE-STACK PART
Pre-stack pile of paper under the condition of non-stop, improve
efficiency.