Add to Cart
Z-Zone Full-Automatic Capsule Filling Machine
Machine specifications and technical parameters
Equipment model, specification | NJP-3500Automatic hard capsule filling machine | |
Technical Data | Machine weight | 2400kg |
Dimensions | 1130×1280×2060mm | |
Motor Power | 9.55kw | |
Power Supply | Three-phase four-wire AC 380V;50Hz | |
Maximum production capacity | 3500 capsules/min | |
Fillable capsule number | 00#~5# and Safety capsule A~E | |
Capsule probability | ≥99.5% | |
Noise | ≤75dBA | |
Load difference | Above 300mg ≤±3% (filling of granules from 40 to 80 mesh after granulation) | |
Compressed air | 0.06m3/min 0.3Mpa | |
Water source requirement | The water ring vacuum pump is equipped with a water tank for recycling, and can also be connected to an external water source. | |
Vacuum degree | -0.02~-0.06 MPa | |
Water flow | 250L/h | |
Inlet pipe inner diameter | 20mm | |
Drain pipe inner diameter | 27mm | |
Working temperature | 21℃±3℃ | |
Working plant height requirement | Artificial feeding≥2.6m,Vacuum feeding≥2.8m | |
Working environment relative humidity | 40~55% | |
Exhaust volume | 300m3/h | |
Special function | The pellet filling device can be added; the powder collector function (filling part of the powder is recovered by another pipeline, and can be directly added to the hopper filling again without disinfection, sterilization) | |
Control System | Variable frequency stepless speed regulation, PLC control | |
Material | Parts in direct contact with capsules and pharmaceuticals are made of high quality stainless steel |
NJP-3500Series Closed Full-Automatic Capsule Filling Machine Outfit
Description | Specification/Model NO | From | Remark | |
Exactitude intermission graduator | R140F061202L-S2-CN R180F101502L-S1-CN | TAIWAN | 1 set for each | |
main machine | R37DT90L4 | SEW | 1 | |
vacuum pump | SZ-1.2 | Shang hai china | 1 | |
cleaner | 3.0KW | zhejiang china | 1 | |
Man-machine interface | 6AV6 648-0AC11-AX0 | WEINVIEW | 1 | |
transducer | VFD037E43A | AirTAC | 1 | |
PLC | DVP-24ES | AirTAC | 1 | |
light axis | DKNΦ20-50 | Japan | 1 | |
beeline axletree | SDE12Y | SEIKO | 26 | |
beeline axletree | SDE20Y | SEIKO | 10 | |
beeline axletree | SDE25Y | SEIKO | 12 | |
beeline axletree | SDE50Y | SEIKO | 4 | |
Roller | CF-8 | Japan | 10 | |
Roller | CF-12 | Japan | 3 | |
Roller | CF-16 | Japan | 2 | |
Roller | CF-20K | Japan | 2 | |
hot relay | 3UA50 | siemens, German | 3 | |
relay | 3TB43 | siemens, German | 1 | |
relay | 3TB41 | siemens, German | 3 | |
breaker | 5SJ63-3P-32A | siemens, German | 1 | |
breaker | 5SJ61-1P-10A | siemens, German | 1 | |
sensor | LJC30A-H-Z/AB2 | Shanghai, China | 1 |