Tapered Edge Fiberglass Faced Gypsum Board , Gypsum 12.5 Mm Plasterboard OEM

12.5mm Gypsum Durable Fiberglass Plasterboard Reinforced Glass Fiber Gypsum Board

Product Description

Glass Fiber Reinforced Gypsum (GFRG) Panel is a composite consisting of alpha gypsum cement and water, reinforced with glass fibers – an ideal choice as an economical, lightweight, and durable replacement for traditional plaster.

Glass fiber reinforced gypsum board (GFRG) is a construction panel product made from calcined gypsum, plaster. Produced under strictly controlled conditions, the panels are 124 mm thick, 12 m long and 3 m high, contain cavities and can be unfilled, partially filled or fully filled with reinforced concrete, depending on structural requirements. Experiments and studies in Australia, China and India have shown that GFRG panels, properly filled with plain reinforced concrete, have considerable strength and can be used not only as load-bearing elements but also as shear walls, capable of resisting lateral loads caused by earthquakes and wind.GFRG panels can also be used as infill (non-load-bearing) in combination with columns and beams of RCC frames (conventional frame construction for multi-story buildings). There is no restriction on the number of storeys, and the micro-beams and RCC mortar (acting on T-beams) can be used as floor/roof slabs.

Product Features

GFRG panel possesses high flexural strength, shearing strength, compressive strength, and flexibility. It has a very high level of resistance to fire, water, heat, corrosion, rot, and termites. Concrete filled with vertical reinforcement rods improves it’s vertical and lateral load capacities. GFRG made buildings are resistant to fire, earthquakes, and cyclones.

Product Parameters

Product Appliction

Glass Fiber Reinforced Gypsum (GFRG or GRG) is the most economical Formglas material and is used in a range of architectural applications such as ceilings, column covers, decorative wall panels, domes, bulkheads, light coves, and more.

• Interior walls and ceilings: GFRG boards are commonly used in interior walls and ceilings because of their high strength and fire-resistant properties.
• False ceilings: GFRG boards are lightweight and can be easily suspended from the ceiling. They are an ideal choice for false ceilings in commercial and residential buildings.
• Partition walls: GFRG boards are used to create partition walls in both residential and commercial buildings. They are easy to install and can be used to create temporary walls.
• Column enclosures: GFRG boards are used to enclose columns in buildings. They are fire-resistant and provide a clean, smooth finish.

Packaging&Shipping

Located in Guangdong Province，Foshan Huiju Decoration Material Co.,Ltd. was established in 1993. It is a professional company that specializes in one stop solution for (Gypsum bord/cement board/WPC)ceiling and partition wall system. Our Brand is SUNHOUSE and mainly products：gypsum board, fiber cement board, pvc gypsum tile，wpc wall panel and light steel keel. These products are widely used in construction project and indoor decoration.

After 30 years development, our factory cover an area of 8000 square meters, there are 2 R&D teams, 12 skilled trade salesman, and over 100 workers in our factory. With 8 automatic production lines, our monthly capacity reach 300 thousand square meter, which could fully meet customer’s request.

We have more than 50 thousand square meter products in stock，so we accpet urgent orders and the lead time can short to 7days. Free samples are avaliable and the delivery is very fast. We can also provide certificate such as FSC，CARB，CE，etc.