GENERAL ELECTRIC MOTOR CONTROL BOARD IC3650SSNE1 for the Mark I and Mark II series
Brand Name:GE
Model Number:IC3650SSNE1
Minimum Order Quantity:1
Delivery Time:3-5days
Payment Terms:T/T, Western Union
Place of Origin:USA
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
Chunfeng Road
Supplier`s last login times:
within 16 hours
Product Details
Company Profile
Product Details
GENERAL ELECTRIC MOTOR CONTROL BOARD IC3650SSNE1 for the Mark I and
Mark II series
Quick Details
Part:IC3650SSNE1
Manufacturer: GENERAL ELECTRIC MOTOR CONTROL BOARD
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| ABB Module | AB Module 1756-,1759- Tourch Screen 2711- |
| Mitsubishi Drive MR- , Motor HA -,HC | Emerson MoudlesVE- ,KJ - |
| Fanuc motor A0-, Drive | Yokogawa transmitter EJA- |
| Rosemount Transmitter 3051- | Schneider Module 140- |
| Panasonic Motor , Drive MH- | Siemens Module 6ES-, Touch Screen 6AV- |
About GE Fanuc IC3600EPZU1
The IC3600EPZU1 is a GE FANUC Power Supply Board for the Mark I and Mark II series. These were the first two in the Speedtronic series for gas/steam turbine management. They are both designed to control the turbine output and limit it to within the unit’s capabilities, sequence parameters during startup, provide a protective shutdown in the case of a non-recoverable system failure, and to monitor and annunciate malfunctions.
The IC3600EPZU1 is marked with the GE trademark. It carries the codes 006/01 and 002/01 and is marked EPZU separately from its board identification number. One edge is numbered.
The IC3600EPZU1 has one fuse, four diodes, and two wire wound resistors. These are marked 2147902 10K 5% 10W and 2147901 1K 5% 10W. It has one polyester vinyl capacitor marked 2Q78 10μF +/- 10%. It has nine aluminum electrolytic capacitors in three lines of three. These are marked 30D + TE 1307 50μF 50 VDC 105C + 9807H.
The board also has one metal oxide varistor, which is placed near the center of the board and marked MOV1. Varistors are voltage dependent resistors that have voltage-current characteristics similar to diodes. They are used to protect electrical devices from high transient voltages and will short themselves out when a high current is produced due to high voltage.
The IC3600EPZU1has twenty-five pins attached to one edge. When the IC3600EPZU1 is inserted into a Speedtronic frame these pins are wired together and allow the board to communicate with the rest of the system.
The IC3600EPZU1 will ship to you in a protective, static reducing sleeve. All technical support for this part was provided by GE.
Similar prodcut for GE Fanuc IC693CMM321
| Part Number | Description |
All Parts Commonly | Call Parts Super Center 800-727-8443 |
| 106B7033P1 | Operating Arm, IC9445 Lever Limit Switch |
| 106B7085G5 | Cam Follower, IC9446 Rotating Limit Switch |
| 117A7920P1 | Roller, IC9445 Lever Limit Switch |
| 129B5749P1 | Star Wheel, IC9445 Lever Limit Switch |
| 144A4871P2 | Shaft, IC9445 Lever Limit Switch |
| 1970369P7 | Weight for Operating Arm, IC9445 Lever Limit Switch |
| 721B773G1 | Contact Unit, IC9445 Lever Limit Switch |
| 721B773G3 | Contact Unit, IC9445 Lever Limit Switch |
| Limit Switch, Lever, General-purpose, Standard Contact, 1 Circuit, IC9445 Lever Limit Switch | |
| IC9445A200AB | Limit Switch, Lever, General-purpose, Standard Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445A200AC | Limit Switch, Lever, General-purpose, Maintained Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445A204AM | Limit Switch, Lever, General-purpose, Snap Action Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445B200AA | Limit Switch, Lever, Watertight, Standard Contact, 1 Circuit, IC9445 Lever Switch |
| Limit Switch, Lever, Watertight, Standard Contact, 2 Circuits, IC9445 Lever Limit Switch | |
| IC9445B200AC | Limit Switch, Lever, Watertight, Maintained Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445B206AM | Limit Switch, Lever, Watertight, Snap Action Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445B206AN | Limit Switch, Lever, Watertight, Snap Action Contact, 1 Circuit, IC9445 Lever Limit Switch |
| IC9445C200 | Limit Switch, Lever, Weight, Cable, General-purpose, IC9445 Lever Limit Switch |
| IC9445C208 | Limit Switch, Lever, Less Weight, Cable, General-purpose, IC9445 Lever Limit Switch |
| IC9445D200 | Limit Switch, Lever, Weight, Cable, Watertight, IC9445 Lever Limit Switch |
| IC9445D204 | Limit Switch, Lever, Less Weight, Cable, Watertight, IC9445 Lever Limit Switch |
| IC9445H200AA | Limit Switch, Lever, Watertight Bronze, Standard Contact, 1 Circuit, IC9445 Lever Limit Switch |
| IC9445H200AB | Limit Switch, Lever, Watertight Bronze, Standard Contact, 2 Circuits, IC9445 Lever Limit Switch |
| IC9445Y100 | Lever, Straight, Molded Phenolic, 4 Inch, IC9445 Lever Limit Switch |
| IC9445Y101 | Lever, Straight, Hardened Steel, 4 Inch, IC9445 Lever Limit Switch |
| IC9445Y102 | Lever, Forked Roller, Harden Steel, IC9445 Lever Limit Switch |
| IC9445Y103 | Lever, Straight, Hardened Steel, 4 Inch, IC9445 Lever Limit Switch |
| IC9445Y106 | Lever, Crane Hoist Hook, 6 Feet Cable, IC9445 Lever Limit Switch |
| IC9445Y108 | Lever Straight, IC9445 Lever Limit Switch |
| IC9445Y110 | Lever, Fork, IC9445 Lever Limit Switch |
| IC9445Y111 | Lever, Straight, Molded Phenolic, 7 Inch, IC9445 Lever Limit Switch |
| IC9445Y112 | Lever, Straight, Molded Phenolic, 6 Inch, IC9445 Lever Limit Switch |
| IC9445Y113 | Lever, Offset, Molded Phenolic, 6 Inch, IC9445 Lever Limit Switch |
| IC9445Y114 | Lever, Straight, Hardened Steel, 6 Inch, IC9445 Lever Limit Switch |
| IC9445Y115 | Lever, Straight, Hardened Steel, 6 Inch, IC9445 Lever Limit Switch |
| IC9445Y116 | Lever, Straight, Composition Rubber, 6 Inch, IC9445 Lever Limit Switch |
| IC9445Y138 | Lever, Hardened Steel, 7 Inch, IC9445 Lever Limit Switch |
FAQ
Q1. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass
production.
Q2. Do you have any MOQ limit of Industrial Servo Drives?
A: Low MOQ, 1pc is available.
Q3. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive.
Airline and sea shipping also optional.
Secondly, during the guarantee period, we will send new lights with
new order for small quantity. For defective batch products, we will
repair them and resend them to you or we can discuss the solution
including re-call according to real situation.
GENERAL ELECTRIC MOTOR CONTROL BOARD IC3650SSNE1 for the Mark I and Mark II series
Inquiry Cart
0