GE IC697MDL940 OUTPUT MODULE 16 POINT RELAY OUTPUT 16 AMPS 120/240 VAC OR 5/24/125 VDC 480 VA OR 60 WATTS

GE IC697MDL940 OUTPUT MODULE 16 POINT RELAY OUTPUT 16 AMPS 120/240 VAC OR 5/24/125 VDC 480 VA OR 60 WATTS

Product information GE IC697MDL940 :

The IC697MDL940 is a Series 90-70 Programmable Logic Controller (PLC) module, specifically a Relay output module with a total of Sixteen (16) relay output channels. Specifically, it has Eight (8) Form C Contact outputs and Eight (8) Form A or Normally Open (N.O.) in Two (2) groups of Four (4) Form A contacts each channel. This module has a nominal voltage rating of 120/240 VAC or 5/24/125 VDC with a maximum power consumption of 480 VA for AC loads or 60 watts for DC loads.

It has maximum load current ratings of 2.0 amps from 5 to 265 VAC at 47-63 Hz; 2.0 amps from 5 to 30 VDC; 0.2 amps from 31 to 125 VDC and 0.2 amps from 31 to 150 VDC applicable for Form A contact outputs only while the module’s minimum load current is 10 mA. Each output channel has a maximum response time of 10 ms for both On and Off signal transition and switching frequency of 20 Cycles per minute when used with an inductive load. The output relays of this module are fixed coil, moving armature type while the output contacts are made of silver alloy with a maximum contact resistance of 0.2 Ohm and expected contact life of 20,000,000 operations for mechanical operations and 1,000,000 electrical operations at resistive inductive load. Each output of the IC697MDL940 is installed with a 3 Ampere fuse used as built-in channel protection along a snubber circuit which consists of a 47 Ohm resistor and capacitor with 0.015 µfd capacitance value.

The IC697MDL940 output relay module is an output relay module designed and manufactured by GE Fanuc. The module is typically used with GE PLC devices from Series 90-70 and it is equipped with 3-Amp rated fuses for protection. The module has a typical contact life of 300,000 to 1,000,000 operations and it has a maximum load current of 0.1 to 2 Amps for a resistive load and 0.05 to 1 Amp for a inductive load. This particular GE Fanuc module is designed for both AC and DC operation and it includes operating voltage ratings of 120 to 240 Volts AC or 5, 24, or 125 Volts DC.

The module has 16 outputs and it features an operating frequency of 47 to 63 Hertz (for AC voltage only). The configuration of the output points includes 8 points configured in Form C and same number of points configured in Form A. The output points in Form C are isolated and other points are placed in 2 groups.

The isolation voltage rating of the GE Fanuc IC697MDL940 output relay module is 1500 Volts and its switching frequency is 20 cycles per minute for an inductive load. The module has a maximum output current leakage of 1 milliAmp at 120 Volts AC and a maximum load current of 16 Amps per module or 4 Amps per group. The rated current of the IC697MDL940 module is 750 milliAmps. The module’s response time is 10 milliseconds and it features a maximum power rating of 480 Volt-Amps for AC loads and 60 Watts for DC loads. The IC697MDL940 module has silver alloy contacts with a 0.2-Ohm maximum resistance rating. The module has a fixed coil relay with a moving armature.

Technical Information :

IC697MDL940 's details:


Note:

Our brand:

Wisdomlong Technology CO.,LTD locats at the central of China,Shenzhen, Guangdong Province. With rapid development, Wisdomlong serves fields of automation in global markets, Our business covers five continents throughout the world with the basic conviction of honest, the international management of customer-centered concept and purpose of bringing convenience to customers. We have confidence to bring our customers more substantial profit with high-quality service and reasonable prices.

Choosing us,you will choose a sincere friend and reliable partner. Please feel free to contact us if you are a global manufacturer of high quality brand products who desires to enter the Chinese market or who searches for a Chinese agent.We would like to create a brilliant future with friends in domestic and overseas. All goods sold have one year warranty.

The company with domestic and international numerous well-known brands supplier to build have extremely good relations of cooperation, in Japan, South Korea, southeast Asia, Africa, Europe and the United States, and formed a stable and efficient supply network. The agent and the products are widely used in machinery, equipment manufacturing, electric power, metallurgy, petrochemical, automobile manufacturing industry, paper making, chemical industry, medicine and aerospace industries.