Add to Cart
Three Phase Keypad Prepayment Electricity Meter
The RHF168C offers options for extended surge protection for
lightening up to 13kV
and a wide voltage working range -50% ~ +130%. It is intended for
unstable grid
voltage environment such as African and Central American continent
where
brownouts and voltage dips are extremely frequent. The meter works
in a three
phase four wire network with 100 Amp per phase, and 30 Vm withstand
of RF
immunity, allowing it to operate in very severe environments. It is
a perfect
revenue protection device for sub-metering of residential, light
commercial and
industrial applications.
Split Configuration for Increased Revenue Protection
The meter consists of two parts, the MCU (Metering & Control
Unit) and UIU (User Interface Unit). The MCU and UIU is linked via
galvanically-isolated 2-wire communication cable or Radio Frequency
(RF) communication is also available on request.
The UIU is installed within consumer’s home for prepaid token input
and info inquiry, while MCU is installed in a meter cabinet away
from consumers.
Main Features
● 20 digit (Standard Transfer Specification) STS encryption
● DLMS / COSEM standards compliant
● Connect with the backend platform by GPRS, built-in pluggable
GPRS module
● Disconnects on overload and no credit
● Programmable power limit and low credit warning
● Tamper detection and event record such as opening cover, reverse
connection, black-out
● Dual power source swap between grid supply and solar with
prepayment and post-payment
● Maximum demand measurement and load profiling (on request)
Utility Benefit
❖ Easy and quick to install with no need of extra communication
devices
❖ Input payment control elements, such as emergency unit, tariff,
free basic unit, repayment, fixed charge, VAT etc.
❖ 4 tariffs /8 time divisions /100 holidays usage recorded on TOU
basis
❖ Flexible AMR AMI setup
❖ Support Plug-in GPRS module
Electrical parameters: | ||
Nominal voltage Un | 3x240V | |
Limited voltage | 60%~120%Un | |
Frequency | 50/60Hz+5% | |
Basic current(Ib) | 10A | |
Maximum current(Imax) | 100A | |
Starting current(Ist) | 30mA | |
Active energy constant | 400imp/kWh | |
Accuracy | ||
Active energy IEC62053 ‐ 21 | Class1.0 | |
Reactive energy IEC62053 ‐23 | Class2.0 | |
Burden | ||
Voltage circuit | <2W <8VA | |
Current circuit | <1VA | |
Temperature range | ||
Operation meter | 25C to+70C | |
Storage | 40C to+85C | |
Insulation strength | ||
Insulation level | 4kV , 1min | |
Voltage Impulse withstand | 8kV, 1.2/50μs | |
Electro Magnetic Compatibility | ||
Electrostatic discharges | ||
Contact discharge | 8kV | |
Air discharge | 16kV | |
Electromagnetic RF fields | ||
27MHz to 500MHz typical | 10V/m | |
100kHz to 1GHz typical | 30V/m | |
Fast transient burst test | 4kV | |
Protection Rating IP54 | ||
Insulation Classification | Protective Class II | |
Maximum cable size | 10 mm |