High Current Ceramic Thermal Fuse 230℃ 10A 20A 30A 40A 250V Overheating Protector

Product Description:

Electric Fan Motor Axial Ceramic Case Resistor Type Temperature Fuse Thermal Cutoff Fuse

Structure
The thermal fuse is composed of ceramic shell, low melting point alloy wire, special resin, pin copper wire and sealing resin.

Apprearance
The marking must be clear; the sealing resin should fill the mouth and it is acceptable; the lead tin-plated layer is good; there is no oxidized black spot damage; the shell has no damage marks, perforations, etc.

Experimental Method
The experimental conditions are temperature 25±10℃, humidity 65±15%M
1 Action humidity accuracy: Rely on the IE691: 1995 inspection method and measure with the built-in silicone oil pool in the thermostat.
2 Size: Measure the finished product with a micrometer/vernier ruler.
3 Appearance: visual inspection.
4 Insulation resistance: Measure the finished product with SP-3A digital megohmmeter, and measure the voltage DC500V.
5 Withstand voltage: Use the ZNY-12 withstand voltage test to determine the finished product, which takes 1 minute.
6 Tensile force: Measure the finished product with a push-pull tester, and the pin bears 1.5 pounds of pulling force for 10 minutes without damaging the components.
7 Torsion: Bend the lead at 10mm at 90°C, and then reverse it at 180°C without damaging the component.

Test Requirements
1. Rated operating temperature (Tf): The temperature at which the thermal fuse is tested according to the standard method to change its conductive state. (The Japanese Electrical Appliances Management Law stipulates that the tolerance range is ±7℃ for operation).

2. Measured operating temperature: The temperature fuse is heated in the silicone oil bath at a rate of 0.5-1°C per minute, and the fusing temperature obtained when the detection current is less than 100MA. It is the actual temperature of the thermal fuse.

3. Holding temperature (Tc): The maximum temperature at which the thermal fuse can maintain 168 hours without changing its conductive state when passing the rated current.

4. Limit temperature (Tm): The maximum temperature at which the thermal fuse can withstand 10 minutes without reconnection.

5. Rated voltage (Ur): The highest working voltage of the thermal fuse.

Features:

• Product Name: Thermal Cutoff Fuse
• Rated Current: 10A, 16A
• Usage: Thermal
• Breaking Capacity: High
• Rated Voltage: 250V
• Case: Metal
• Thermal Safety Cutoff
• Thermal Fuse Thermal Cutoff
• Thermal Fuse Interlock
• Thermal Cutoff Switch

Technical Parameters:

Applications:

Model Number: RY RYB Series

Place of Origin: China DongGuang

LinKun RY RYB Series Thermal Cutoff Fuse is a type of thermal protection device used in various electrical appliances and equipment. It is designed to protect against overheating and potential fire hazards caused by excessive electrical currents.

• Rated Current: 10A, 16A
• Rated Voltage: 250V
• Breaking Capacity: High
• Case: Metal
• Rated Temperature: 76℃ to 260℃

The LinKun RY RYB Series Thermal Cutoff Fuse is widely used in a variety of electronic and electrical equipment, including:

• Home appliances such as refrigerators, air conditioners, and washing machines
• Office equipment such as computers, printers, and copiers
• Industrial equipment such as motors, transformers, and power supplies
• Automotive electronics such as car stereos and power windows

The LinKun RY RYB Series Thermal Cutoff Fuse has the following key features:

• Thermal Cutoff Switch: This device works as a temperature-sensitive switch that automatically disconnects the circuit when the temperature reaches a certain level, preventing overheating and fire hazards.
• Thermal Shutoff Fusible Link: The fusible link is a low melting point alloy that melts and breaks the circuit when the temperature rises above the rated temperature, providing a reliable and quick response to overcurrent situations.
• Thermal Trip Device: In case of a short circuit or excessive current, the thermal trip device will activate and disconnect the circuit, protecting the equipment and preventing further damage.

Overall, the LinKun RY RYB Series Thermal Cutoff Fuse offers a high level of safety and protection for various electrical appliances and equipment, providing peace of mind for both manufacturers and users.

Customization:

Brand Name: LinKun

Model Number: RY RYB Series

Place of Origin: China DongGuang

Shape: Resistor

Rated Current: 10A, 16A

Rated Temperature: 76℃ to 260℃

Breaking Capacity: High

Case: Metal

At LinKun, we understand the importance of reliable and efficient thermal protection for your electronic devices. That's why we offer customized Thermal Cutoff Fuse solutions to meet your specific needs and requirements.

Our Thermal Fuse Interlock technology provides a temperature sensitive circuit breaker that automatically cuts off the power when the temperature reaches the preset limit. This prevents overheating and potential damage to your equipment.

With our Thermal Fuse Thermal Cutoff design, you can rest assured that your devices are protected from excess heat, even in the most demanding environments. Our fuses are designed to quickly and effectively break the circuit, ensuring the safety of your equipment and preventing any potential hazards.

Our customized service allows you to choose the specific parameters for your Thermal Cutoff Fuse, including the shape, rated current, rated temperature, and breaking capacity. This ensures that our fuses are tailored to your exact needs, providing the most effective protection for your devices.

Choose LinKun for your Thermal Cutoff Fuse needs and experience the peace of mind that comes with high-quality, reliable thermal protection. Contact us today to learn more about our customized service and how we can help protect your electronic equipment.

Packing and Shipping: