TUV Ceramic Guide Block for Bandsaws with High Precision Tolerance
Brand Name:Mingrui
Certification:ISO9001, , CE, UL, TUV
Model Number:XF- 464
Minimum Order Quantity:1 pieces
Delivery Time:15 working days after the order confirmed
Payment Terms:L/C, T/T, Western Union, MoneyGram, D/P, D/A
Contact Now
Add to Cart
Active Member
Location:
Dongguan Guangdong China
Address:
NO 21st ChuangXing Road, Shangsha community , Changan Town, Dongguan city Guangdong province, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Low Friction Ceramic Guide Blocks for Bandsaws with High Precision Tolerance
Tag key words : Ceramic guide block
Ceramic Guide Blocks are made of Aluminum-Oxide - the same material used to make ceramic products for NASA. They create far less friction to provide a cooler running blade and truer tracking. You'll get guide block seat tolerance of +/-.005. Outlasts every other guideblock on the market!
#26687 - Guide Blocks for 14" Delta Band Saws:
(3) 1/2" x 1/2" x 7/8" Blocks
(1) 1/2" x 1/2" x 1-3/8" Angled Block
#26696 - Guide Blocks for 14" Jet Band Saws:
(4) 1/2" x 1/2" x 3/4" Blocks
(3) 1/2" x 1/2" x 7/8" Blocks
(1) 1/2" x 1/2" x 1-3/8" Angled Block
#26696 - Guide Blocks for 14" Jet Band Saws:
(4) 1/2" x 1/2" x 3/4" Blocks
Carter Band Saw Guides are a popular upgrade option for most band saws. What are they? Carter guides are designed to add stability to the
blade, especially in tight curves. Unlike the stationary guide
blocks that most of us are used to seeing, they use rollers to
guide the blade, both above and below the table.
Ceramic Guide Blocks TECHNICAL DETAILS
These blocks will only fit 14" Delta or Jet Band-Saws.
Mingrui Ceramic Guide Blocks are made from zirconia and alumina ceramic . They contain no ceramic fibres, and as a result, offer better insulation performance than comparative competitive products.
Ceramic Guide Blocks key features are:
- Excellent strength and insulating properties
- Lower thermal conductivity than competitive vermiculite block products
- Resistance to aluminium cryolite attack
Ceramic Guide Blocks are ideal as a solution:
- Melting and holding furnaces for iron, steel and aluminium industries
- Aluminum Pot Cells
- Back-up to furnace linings
See our product datasheets for more information on our range of structural block insulation products or contact us to discuss your requirements.
Ceramic Guide Blocks
■Good smoothness / flatness with less porosity. Excellent in
adhesion with thin film and thick film materials.
Ceramic Guide Blocks with Less variance in outline, plate thickness, slit pitch, etc.
■Minimal warpage, bending, and undulation.
■Physical and chemical properties are stable even under a hot
environment. Excellent in thermal shock resistance. High thermal
conductivity and coefficient of thermal expansion similar to that
of silicon.
■Superior mechanical strength. Products with higher mechanical
strength are also in our lineup.
■Excellent resistance against oil and chemical.
■Excellent in insulation properties, high dielectric breakdown
voltage, high surface resistivity / volume resistivity, and small
dielectric constant.
■Stable breaking strength, and less variance in shape or
dimensions.
■The high reflective substrate, especially suitable for optical
applications such as LED, is also available.
Applications of Ceramic Guide Blocks
Ceramic block can be used for a device or equipment in the special environment such as Power isolation, high temperature protection, durable wear, high and low temperature impact etc...and for the different device should be requiry different ceramic block shapes, like: some device need the round sheet be machining 8 hole to fasten to the box.
Ceramic Guide Blocks offers consistently reliable and convincing performance even when subject to high thermal and electrical loads in terms of its:
Thermocycling capability
Thermal shock resistance
Flexural strength
Surface quality
Thermal conductivity
Ceramic Guide Blocks Features :
1. Refractory, High Temperature Resistance, Maximum Used
Temperature: 1800 ºC (3272ºF)...
2. Hardness Strength Up To Mohs 9.0; HRA 80-90, Wear Resistance
wear rate 0.68 mm3·m-2·h-1....
3. High Voltage, Good Insulation Performance ,Electrical
Resistivity Up To 10∧14 Ohm.Cm...
4. High Polished Surface Up To Rz0.8(Ra0.1) ...
5. Superior Mechanical Strength, Max 10 MPa.m1/2 Fracture
toughness,
6. Pressure Resistance, Max 2300MPa compressive strength...
7. Anti-High Corrosion Resistance, Such As Acid Alkali
Resistance...
8. Long Service Life...
9. Other excellent property
Properties of Alumina and Zirconia Ceramic :
| Properties | Units | 95 Alumina | 99 Alumina | ZrO2 |
| Density | g / cm³ | 3.65 | 3.92 | 5.95-6.0g/cm³ |
| Water absorption | % | 0 | 0 | 0 |
| Coefficient of thermal expansion | 10-6/K | 7.9 | 8.5 | 10.5 |
| Modulus of Elasticity Young's Mod | GPa | 280 | 340 | 210 |
| Poisson's ratio | / | 0.21 | 0.22 | 0.3 |
| HV Hardness HV | MPa | 1400 | 1650 | 1300-1365 |
| Flexural Strength @ room temperature | MPa | 280 | 310 | 950 |
| Flexural Strength @700°C | MPa | 220 | 230 | 210 |
| Compressive Strength @ room temperature | MPa | 2000 | 2200 | 2000 |
| Fracture Toughness | MPa *m 1/2 | 3.8 | 4.2 | 10 |
| Heat conductivity @ room temperature | W/ m*k | 18-25 | 26-30 | 2-2.2 |
| Electrical Resistivity @ room temperature | Ω*mm2 /m | >1015 | >1016 | >1015 |
| Max use temperature | °C | 1500 | 1750 | 1050 |
| Resistance to acid alkaline | / | high | high | high |
| Dielectric Constant | / | 9.5 | 9.8 | 26 |
| Dielectric Strength | KV/mm | 16 | 22 | / |
| Thermol Shock Resistance | △ T ( °C ) | 220 | 180-200 | 280-350 |
| Tensile Strength @ 25 °C | MPa | 200 | 248 | 252 |
Produce and machining
We can produce different sizes and shapes of the sheets for specific applications to different custom products.Such as drilling, polishing, stripes, concave and convex, screw holes, metal parts position and so on
1. Can Be Custom By Drawing Or The Parameter
2.Can Be Offer a Samples Within 1--10 Qty
3. The Shipping Time Of The Samples Within 2days
4. Quick Delivery Via Fedex,Dhl,Ups,Tnt Etc.
For more informations (the price,payment etc), Please contact us or email: admin@cerampart.com
Blue Ceramic Plate / Blue Ceramic Block more photos:
Our High precision Machining Machine :
Laser Cutting machine making holes :
FAQ :
1. What kind of industry ceramics do you have ?
We specialized in 95% 97% 99% alumina ceramic and zirconia ceramic parts .
2. What kind of molding method do can you supply ?
Dry Pressing , isostatic pressing , grouting , hot-chamber die casting , tape casting , injection molding, etc, injection molding and isostatic molding is the most commonly used.
3.What stabilizer do you use when processing ?
Yttria stabilizer is the most commonly used in our industrial ceramic parts.
4.Can you produce free samples for me ?
Yes usually , we can produce free samples for you but it is up to the product complexity .
5.What terms can you accept for payment ?
T/T, L/C , Western union , Money Gram and Paypal is welcome , but paypal and western union only for small -sum payment.
TUV Ceramic Guide Block for Bandsaws with High Precision Tolerance
Inquiry Cart
0