Automatic Customized PU Sandwich Panel Production Line With Track Device
Brand Name:S&G Engineering Solution Limited
Certification:ISO:9001
Model Number:S&G-PU Sandwich Wall Panel
Minimum Order Quantity:1Set
Delivery Time:90 working days after received your payment
Payment Terms:T/T or western Union
Contact Now
Add to Cart
Active Member
Location:
Wuxi Jiangsu China
Address:
No.18, GaoYun Rd, BinHu District, Wuxi City, Jiangsu Province, PRC
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Automatic Customized Sandwich Panel Glue Brushing Production Line With Track Device,Whole production line speed:1-6m/min
Automatic customized sandwich panel glue brushing production line:
1. Can automatically cement, adhesive bond and compound two-layer,
three-layer or multilayer plates, with high degree of automation
and high production efficiency;
2. With functions of automatic loading and unloading materials, and
automatic location and compound etc;
3. Can adjust the coating volume and speed according to plate
specifications, material quality and other technological
requirements;
4. With automatic measuring system to ensure the stable serlant
volume, uniform cementing layer. Comparing with traditional brush
coating by hand, it can save adhesive for 30% above;
5. Use safe and environmental protective polyurethane adhesive
(bi-components or one component are accepted), the produced plates
are non-poisonous and tasteless, comply with green and
environmental protection requirements, with superior product
quality;
6. Can be designed individually according to user's special
requests;
7. Can be extensively used for the adhesive bonding of plates such
as boards, santocel boards, glass, plastic boards, steel plates,
aluminum sheet and other material qualities.
Main technical parameters:
| Specification of the panel | 500~1000mm (width) |
| Panel thicness | 30-200mm |
| Gauge length | Controlled by encoder, as per your need |
| Whole production line speed | 1-6m/min |
| Length of belt laminator | 24m |
| Temperature of hot-air circulation | Max 70 degree |
| Dimensions of the line | about 58m× 4m× 3m(L× W× H) |
| Total weight | Approx 40 tons |
| Standard power source | AC380V± 10%/50Hz |
Components of machine:
| Components | QTY. | |
| Hydraulic Uncoiller | 2 sets | |
| Platform for forming machine | 1 set | |
| Roll Forming System | 2 sets | |
| Foaming system | 1 set | |
| Double Belt Laminator | 1 set | |
| Cutting System | 1 set | |
| Stacking system | 1 set | |
More Specifications:
| Material | Raw material | colored steel plate, galvanized plate, or aluminum plate |
| Thickness | 0.3-0.8 mm (As customer`s need) | |
| Feeding width | 300mm-1250mm (According to customer`s profile) | |
| Material hardness: | 550 Mpa---350 Mpa | |
Hydraulic Uncoiler | Inner Diameter | 510-610mm |
| Max Coil width | 1250mm | |
| Capacity | 10T/8T | |
| Hydraulic cylinder lift stroke | Up panel 0.5m, Down panel 0.5m | |
| Coil car stroke | 2.5m | |
| Pressure of hydraulic system | 6.3Mpa | |
Main Forming | Forming steps | 14 stations ( Depend on Profiles ) |
| Shaft diameter | Φ60mm | |
| Design type | Middle plate welded | |
| Transmission | Gear box (Chain and gear box depend on thickness and customer`s need) | |
| Machine frame | 350# H steel welded; Steel plate welded/ Memorial arch frame type | |
| Roller material | Gcr15MoV | |
| Shaft material | 45# steel with tempering | |
| Cutting blade material | Gcr12MoV quenched | |
| Working speed | 3-6m/min | |
| Power of machine | 300KW (According to the thickness) | |
| Type of cutting | Hydraulic | |
| Cutting tolerance | ±1mm | |
| Material of blades | Gcr12 quenched | |
| Cutter quantity | 1 set | |
| Working pressure | 20MPA | |
| Pre-heating Room | Temperature sensor | Hot couple |
| Temperature adjustment | Automatic control by temperature control equipment | |
| Hot air motor | 18.5Kw | |
| Hot air heater | 200Kw | |
| Heat type | Heated by electricity and air circulate | |
| Flying Saw Cutting Machine | Outline dimension of band saw cutting machine | 5500mmx5000mmx 3000mm |
| Run speed of band saw | 1000-1500rpm | |
| Rotate diameter of band saw | 550mm | |
| Cutting speed of band saw | 50m/min-1000m/min | |
| Width of band saw | 30mm | |
| Length of band saw | 3000mm-4000mm | |
| Transverse move distance | 1500mm | |
| Cut length on line | 3000mm | |
| Configurations | Uncoiling→ (Perforation machine )→Feeding material into machine→
Roll forming→ PU foaming→ Pre-heating Room→ Auto cutting→ Products
receiving | |
Other Spare part | Weight | About 25 ton |
| Dimension | 42000mm * 3600mm * 3300mm | |
| Main body color | As required | |
| Voltage | 380v/50hz/3ph(or as required) | |
| Suitable working temperature | About 25℃ | |
| Spare cutting blade | One piece | |
| Fuse | 2 pieces | |
| Relay | 2 pieces | |
| Travel switch | 2 pieces | |
| Solenoid valve | 1 pieces |
Applications:
Continuous polyurethane production line is widely used in steel
structure workshop, steel villa, housing, supermarkets, air duct,
public places.
1. Nice look and professional design
2. CE certification
3. PLC control, cut to length
4. One year warranty
Pu Sandwich Panel Picture:
Machine Picture:
Automatic Customized PU Sandwich Panel Production Line With Track Device
Inquiry Cart
0