1. T-300k System features
A. 32—256 grade Gray level,Support software Gamma correction.
B. Support the rules and special-shaped handle.
C. 8 ports output,one port can support 512-1024 lamp pixels.
D. Online (also can SD Card) control, offline control Can be
multiple controllers used in combination,
the contents of the line control program stored in the SD card.
E. Compatible with single line or double line chips.
F. If the controller to the lamps distance can choose photoelectric
isolated transmission and as far as
several distances of up to 200-300 M
Note: the T-300 K controller offline control, each machine
controller must put a SD card.
2015 Edition T-300K controller can only be combined with the new
version software LedEdit2014 .
Using the old software does not support the new version of the
controller, the new version
of the controller has been printed the Chinese sign.
2. Support chips:
Support chips: | Software code& Controller type | Lamps/(MAX) | NOTE |
LPD6803,D705, 1101,6909, 6912 | T-300K-6803 | 8192 | 32 grade gray level |
LPD8806,LPD8809 | T-300K-8806 | 4096/8192 |
|
TM1803,TM1804, TM1809,TM1812 | T-300K-TM | 4096/8192 | TM1804&TM1809Divided into high speed and low speed |
TM1903,TM1904, TM1909,TM1912 | T-300K-TM19 | 4096/8192 |
|
UCS6909,UCS6912, UCS7009,UCS5903 | T-300K-UCS32 | 8192 |
|
UCS1903,UCS1909, UCS1912 | T-300K-UCS256 | 4096/8192 | Divided into high speed and low speed |
UCS3903 | T-300K-UCS1024 | 4096/8192 |
|
DMX512 | T-300K-DMX | 1360/4096 | Compatible with standard DMX512 |
WS2801,WS2803 | T-300K-WS | 4096/8192 |
|
WS2811 | T-300K-WS2811 | 4096/8192 | Divided into high s peed and low speed |
DS189 | T-300K-DS189 | 4096/8192 |
|
TLS3001,TLS3002, TLS3008 | T-300K-TLS | 4096/8192 |
|
P9813 | T-300K-P9813 | 4096/8192 |
|
SM16715 | T-300K-SM16715 | 4096/8192 | Divided into high speed and low speed |
SM16716 | T-300K-SM16716 | 4096/8192 |
|
BS0901,BS0902 | T-300K-0901 | 4096/8192 |
|
BS0815 | T-300K-0815 | 4096/8192 |
|
NOTE:if chip is 256 grade gray level and Singleline IC choose .When
programming choice high speed mode
and one interface controls 1024 lamps the play speed can reach 30
frames/s. Double-line IC or single-lineIC with low speed , one
interface controls 512 lamps the play speed can reach 30 frames/s.
3.The meaning of flag
TTL signal(245 signal):
AC IN | Exchange 220V power supply | COM(common port) | GND (ground wire) |
POWER | POWER LIGHT | DAT | Signal |
STATUS | Status light | CLK | The clock line |
SD CARD | SD card slot |
|
|
NOTE:According to TTL signal output, Ground of the controller must
be connected to the lamp ground.
4. wiring diagram
1. The data port of the controller must be connect with the signal
output of led lighting
If the led lighting is dmx led lighting , the B output connect with
the data port of controller
2. The clock port of the controller must be connector with the
clock port of lighting
If the led lighting is dmx led lighting , the A output connect with
the clock port of controller
3.The controller is connected by via the built-in switch
4.The IP address of the computer should be set to: 192.168.60.178
5.The GND of controller must be connector with the GND of led
lighting