FEP winding tube, FEP spiral tube
Brand Name:Prochema
Certification:MSDS
Place of Origin:China
Contact Now
Add to Cart
Active Member
Location:
Mianyang Sichuan China
Address:
23M,Shidai Bldg.,Linyuan road,Mianyang,sichuan
Supplier`s last login times:
within 23 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
ChinaFEP winding tube, FEP spiral tube
Introduction:
FEPtube is made from FEP resin and prepared by the technology of thermoplastic extrusion and blowing. It has non-sticking, heat-resistance, aging resistance, corrosive resistance, non-flammability and good electric property. It can be solid adhesive for PTFE and also a good adhesive for laminating various materials. Its working temperature is up to 200 and is an ideal material for circuit board and flat cable.
Note:
For our fast response ,pleasae kindly get contact with us directly by e mail, not leave message in web.
Features:
The characteristic is a large and bending around the curve, since the minimum bend radius increases with the pipe diameter.
This product is spirally cut at the same time it extrude a tube PFA /FEP resin which is a kind of fluoro-resin.
This spirally tube has the outstanding feature which a fiuoro-resin has. They are heat resistance, chemical resistance, anti-stick property,electrical insulation properties,etc.
It is suitable for wiring union in high temperature atmosphere etc.
Usage : Use to protect wire ,cable etc .
Hose Protection Sleeve Performance
1)Exterior surface:spiral guard surface smooth, no lack of material, cracks, damage and glitches; no foaming and uneven; no impurities and variedness
2)Shore hardness is generally 85 to 90 degrees
3)Good resistance Of high and low temperature performance
4)Good oil resistance
5)Good abrasion resistance
6)Good tensile strength and impact resistance.Tensile strength at room temperature is generally 25 ~ 30Mpa;Impact strength(unnotched):continue
7)Has good UV resistance. Black spiral protection sleeve product line by adding a certain ratio of carbon black to enhance the spiral wrap UV protection properties. This is the black spiral wrap sleeve protective cover than the other colors better UV performance reasons
8)Good antistatic property
10)good insulation and abrasion protection for wires, cables, hoses,pipes and tubing.
Spiral protective sleeve provides maximum protection against abrasion and has a high resitance against ultraviolet weathering in a wide temperature range. It can install easily without removing connectors or terminal . Dramatically increase serviceable life and reduce costly repairs and down.
Properties :
High low temperature resistance:
-200--200°C,high temperature strength is 2 times higher than PTFE
Good adhesive and heat sealability with PTFE:
Below melting point ,it won’t stick any project.Above melting point, it has perfect adhesive property with PTFE, Metal and self-adhesion(heat sealing).
None stick to water ,oil :water contact angle:θ=115o
Electric reliability,High dielectric
60HZ-60MHZ,Under the high and low temperature,thepermittivitykeeps2.1even if the surface damaged ,it won’t has conductive track.
Volume resistance>1018ΩM
Surface resistance>2*1013Ω
Voltaic Arc Resistance>165sNo electric leakage
Weather resistance:It can be used in sunlight and ozone long
Anti-corrosion:Only in high temperature, Fluorin and alkalis can effect it,others
acid,alkali or ester won’t effect it.
Fireproof :If firing, and will still insulate .
High diaphaneity
UL-Resistance :Good penetrability in ultraviolet radiation,and lowest refraction coefficient
Technical dataof FEP:
| Item | Value | ||
| General purpose | Electric purpose | ||
| Density g/cm3 | 2.12-2.17 | 2.12-2.17 | |
| Temperature range°C | -200 -+200 | -200 -+200 | |
| Longi&tray,shrink rate %≤ | 3.0 | 3.0 | |
| Tensile strength Mpa ≥ | 14 | 14 | |
| Elongation at break %≤ | 175 | 175 | |
| Tear Strength (N/m) ≥ | 4.9x104 | 4.9x104 | |
| Dielectric Constanct (106Hz) | 2.15 | ||
| Dissipation Factor 106Hz≤ | 1x10-3 | ||
| Volume resistance (Ω.m) | 1x1014 | ||
Dielectric StrengthTH≤0.05mm Th 0.05-0.1mm M/VTH ≥0.1mm | 100 | ||
| 75 | |||
| 50 | |||
Specification
Dia ø1.5 --300mm, Thickness: 0.015mm to 0.75mm. Length :50mm to unlimited.
For UV lamp T4 T5 T8 T10 T12 , Thickness 0.2 to 0.5mm .
Color and sizes can be customiszed .Surface treated can be done (chemical or plasma treated)
Package :
Plastic bag &carton . Customized is acceptable
FEP winding tube, FEP spiral tube
Inquiry Cart
0