Deep cycle lithium battery 12V 3Ah with BMS protection for back up power
Brand Name:Topband
Certification:ISO9001, ISO14001
Model Number:TB1203F-S120A
Minimum Order Quantity:10pcs
Delivery Time:2-3 weeks for samples, 4-6 weeks for mass production
Place of Origin:China
Contact Now
Add to Cart
Active Member
Address:
Topband Industry Park,Tangtou Town,Bao'an District,Sheznzhen,China
Supplier`s last login times:
within 39 hours
Product Details
Company Profile
Product Details
Rechargeable 12V 3Ah Deep cycle Lithium ion battery , ABS casing
1. Specification
| ITEM | Specifications |
| Battery type | LiFePO4 Battery |
| Nornimal Voltage | 12V |
| Nornimal Voltage | 3Ah |
| Charging Method | CC-CV (constant voltage with limited current) |
| Charge operating temperature | 0°C~45°C |
| Discharge operating temperature | -20°C~60°C |
| Life cycle time | >2000times(100%DOD) |
| Operating temperature (surface temperature) | Charge : 0 to 50 (recommended recharge release < 45°C) Discharge: -20 to 75 (recommended re-discharge release < 60°C) |
| Storage temperature (Recovery 90% after storage) | 1.5 year -30~25°C(1*) 3 months -30~45°C(1*) 1 month -30~60°C(1*) |
2. Dimension drawing:
3. Battery advantages:
- 1) Safe performance
- 2) Longest cycle life
- 3) Environment friendly
- 4) Fast charging
4. Protective circuit specification
The batteries are supplied with a LiFePO4 Battery Management System (BMS)that can monitor and optimized each single prismatic cell during charge & discharge, to protect the battery pack overcharge, over discharge, short circuit. Overall, the BMS helps to ensure safe and accurate running.
| NO. | Items | Content | Specification |
| 5.1 | Over charge | Over-charge protection for each cell | 3.80±0.05V |
| Over-charge release for each cell | 3.60±0.05V | ||
| Over-charge release method | Under the release voltage | ||
| 5.2 | Over discharge | Over-discharge protection for each cell | 2.00±0.08V |
| Over-discharge release for each cell | 2.30±0.10V | ||
| Over-discharge release method | Charging recovery | ||
| 5.3 | Over current | Discharge over current protection | 35~48A |
| Protection delay time | 14~26ms | ||
| Over current release method | Release after cutoff the load. | ||
| 5.4 | Short | Short circuit protection | Available |
| 5.5 | Static power | current consumption≤60uA | |
5. Product overview
6. Battery operation instruction
Charge and discharge
- 1 Charging current:Do not surpass the largest charging current that specification stipulated.
- 2 Charging voltage:Do not surpass the highest limited voltage that specification stipulated.
- 3 Charging temperature:within temperature scope that specification stipulated.
- 4 Charge with constant current, then with the constant voltage, no reverse charge, which is dangerous.
- 5 Special note:
Short time doesn't affect the use of the battery overcharge too, but for a long period of time over discharge or over charge can affect the function of the battery failure, or the battery can't use permanent, appear serious safety hazards, need long time floating please use the recommended floating model specification. Battery when not in use for a long time, because of its own self-discharge characteristics can also cause discharge, to prevent the occurrence of a discharge, battery should maintain a certain capacity, maintain the voltage at 50% state of SOC.
7. Transportation:
* Based on the character of cell, proper environment for transportation of LiFePO4 battery pack need to be created to protect the battery.
* Battery should be stayed in the warehouse 15℃～35℃ where it’s dry, clean, shade, and well-ventilated.
* The battery should be stored in 50% SOC during transportation.
* The battery need to be charged every 6 months if out of use
* Keep the battery against dropping, turning over and serious stacking during loading.
Deep cycle lithium battery 12V 3Ah with BMS protection for back up power
Inquiry Cart
0