16" 20" 24'' Cross Plate Anchor Black Painted/ Hot Dip Galvanized
Brand Name:Yokelink
Minimum Order Quantity:1000pcs
Delivery Time:35~40 days
Payment Terms:L/C, T/T
Place of Origin:China
Price:$8.5-$12.0
Contact Now
Add to Cart
Site Member
Location:
Ningbo Zhejiang China
Address:
Baoshan Road, Beilun,Ningbo, China
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
What is Cross Plate Anchors for?
Cross Plate Anchors are made for installation in augured holes. The
cross plate anchor is formed by two structural plates shaped for
reinforcement. A retainer on the bottom of the anchor holds the nut from the Forged eye rod (sold separately).
During installation, a hole to the size listed on the table for
cross plate anchors is augured to a depth based on the rod length.
The hole is then undercut so that the anchor can be positioned at a
90 degree angle to the guy wire. A rod trench is cut to the guy angle. The width of the
trench should be just sufficient to accommodate the rod. The rod is
secured to the plate anchor and placed in the excavated hole and
trench. The hole is then refilled and tamped.
Cross plate anchors are coated with a rust inhibitor.
Cross Plate Anchors Specification
| Part No. | Anchor Hole | Rod Size | Area | Weight |
| Inch | Inch | Sq. In. | Kg / Pcs | |
| E0416 | 16 | 5/8 or 3/4 | 150 | 3.5 |
| E0420 | 20 | 5/8 or 3/4 or 1 | 250 | 7.3 |
| E0424 | 24 | 3/4 or 1 or 1-1/4 | 400 | 15 |
Cross Plate Anchors Features
The cross plate anchor is constructed from solid, hot-dipped
galvanized steel, with ridged cross plate rims for added
resilience. The anchor is also coated in a rust inhibitor for extra
durability. To pass quality control all cross plate anchors must
meet ASTM specifications.
The anchor can be manually operated by an ‘eye’ at the upper end. A
nut retainer is placed on the flattened bottom of the cross plate
to enable the anchor to be fixed securely into place once
installed.
Because the width of the hole does not negatively affect the
installed anchor’s holding capacity, their installation does not
require specialist anchoring machinery - the hole can be prepared
by the same augers used to install utility poles.
How does Cross Plate Anchors works?
Cross Plate anchors are designed to be inserted diagonally against
the side of a bored or drilled hole, one which has already been
undercut to allow the anchor to sit at a 90-degree angle to the guy
wire.
Once an additional, suitably sized trench is added to allow for the
placement of the Anchor rod, the cross plate anchor can be installed. The cross plate at the
lower end of the anchor digs into the internal soil mass, with a
nut retainer securing the anchor firmly in place. The anchor can
then be operated via the upper end as required.
16" 20" 24'' Cross Plate Anchor Black Painted/ Hot Dip Galvanized
Inquiry Cart
0