Add to Cart
Dimmable 595LM LED Flat Panel Lights 8W For Restaurant Wareproof
Feature:
1• The Straight down lighting solution with only 32mm thickness
2• Super high brightness with low heat
3• Low cost without light guide plate,which avoids risk of truning yellow
4• Full certificated external LED driver,Lifud or BOKE brand,FLICKER FREE is optional
5• No UV, IR and No mercury &lead
6• PF>0.9,CRI>80Ra/90Ra
7• CE,ROHS passed, conform to TUV,GS RCM standards
Product Description
Model No. | MQG-LED-136L (S) | MQG-LED-136L (L) |
Power | 36W | 38W |
Lumen (lm) | 3821 | 4028 |
Efficiency (lm/w) | 106 | 106 |
CRI | ≥80 | ≥90 |
CCT (K) | 2700K-6500K | 2700K-6500K |
Power Factor | >0.9 | >0.9 |
Fixture Size (mm) | 595x595x35 | 1195x295x35 |
Carton Size (cm) | 65x33x65 | 125x33x35 |
Qty/ctn (pcs) | 6 | 6 |
Advantage
Too few LEDs being used. Too few LEDs (generally 36 or less) means
that they have to be driven at a high current to generate the light
output needed. Compared with designs using more LEDs, this is less
efficient (LEDs perform most efficiently with low drive currents),
generates more heat, shortens the life of the LEDs and hastens the
lumen depreciation.
Plastic bodies. The better back-lit panels use a metal body. This
is more effective as a heat sink than a (cheaper) plastic body.
LEDs generate some heat and this needs to be dissipated if their
life is not to be shortened further.
Light distribution not overlapping. In a good back-lit panel each
LED is individually lensed and the lenses are designed so that the
light from each LED overlaps the light from its neighbours. This
will produce an even lit affect and some resilience in the event
that a single LED fails. Poor lens design and a low number of LEDs
is likely to decrease the overlap between LEDs and increase the
risk of bright and dark spots on the front of the fitting.
Are the lenses firmly fixed in position? Only time will tell, but
the risk is that the heat generated by the LEDs, combined with
cheap adhesive poorly applied, will cause the lenses to fall off.
The result will be uneven light distribution and possibly glare
too.
Built-in driver. Manufacturers can save money by building the
driver into the body, but this has multiple drawbacks. It can’t be
replaced in case of a problem and there will be no dimming or
emergency options. It is a very inflexible approach.
Description
The user can adjust the tension of the free-floating tilt to match their body weight. Max Weight Capacity: 150kg. Fully adjustable height with a 360-degree swivel offers a flexible range of motion. This chair can easily adjust the height of the seats according to human spine structure, providing neck, shoulder, waist, and coccyx protection for long hour sitting. The wide padded seat is covered with breathable densely woven polyester fabric that prevents dirt, dust, and food particles from settling into the fiber of this computer chair.