Small PVC Cosmetic Bottle Extrusion Blow Molding Machine SRB55D-1C 428BPH Capacity

Brand Name:BAISU
Certification:CE
Model Number:SRB55D-1C
Minimum Order Quantity:1 Set
Delivery Time:60 DAYS
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now

Add to Cart

Active Member
Address: South Xinyuan Road, Juqiao Economic Development Zone,Luyuan Town, Zhangjiagang City, Jiangsu Province, China
Supplier`s last login times: within 2 hours
Product Details Company Profile
Product Details
Small PVC Cosmetic Bottle Extrusion Blow Molding Machine SRB55D-1C 428BPH Capacity , PVC Bottle Making Machine , 200ml 500ml PVC Bottle Blow Molding Machine

QUICK VIEWS



1. SRB55D-1C is double station single head PVC Bottle Blow Molding Machine, specially used for PVC bottles.


2. Its output for 100ml PVC bottle is 400 Pcs/hour, the output for 250ml PVC container is 350 Pcs/hour.


3. The extrusion head, material runner design, screw design and driving system is specially used for PVC material.

TECHNICAL DATA


Machine ModelEBM SRB55D-1C
Max Product Volume1L
Target MaterialPVC
Machine Size2.55*2.15*2.35m
Machine Weight4.5 Tons
Voltage SuitableCustomer Specified
Screw Diameter55mm
L/D Ratio24:1
Barrel Heating Power11.6 KW
Extrusion Motor Power18.5 KW
Plasticizing Capacity50 KG
Platen Size290x360 mm
Opening Stroke125~380 mm
Max Mould Size300x350 mm
Head No.1
Heating Zone No.2+1
Head Heating Power7 KW
Total Power40.5 KW
Average Energy Consumption20.5 KW
Compressed Air Needed0.6 Mpa / 1.0 m3
Cooling Water Needed3.5 m3/H
Loading Reference20’GP

Click Picture Above to See SRB55D-1C Video for PVC Cosmetic Bottles


MACHINE MAIN FEATURES


1. PVC cosmetic bottle blow molding machine SRB55D-1C, is double station PVC special EBM.
2. Max product volume is 500ML, used for PVC small bottles and containers, PVC jars and cans.
3. Its output for 100ml pvc cosmetic bottle is 420 Pcs/hour, the daily capacity is 10000 bottles.
4. Stainless steel PVC special screw driven by enlarged frequency conversion extrusion motor.
5. Nether bent arm central clamping unit with linear guide rails for platen moving in stability.
6. Stainless steel PVC single head with good runner design and refined process technology.
7. Updated hydraulic system with proportional hydraulic valve for stable and precise actions.
8. Use 2 pneumatic cylinders for head lifting, clean and easy for maintenance and repair.
9. Lubrication pump, scraps slide channels, product clamping boards are included.


PRODUCTION ARRANGEMENT



1. Machine Foundation Size: 3.5 x 2 m


2. Production Area: 7 x 5 m


3. Minimum Workshop Height: 3.0 m


4. Air Supply Requirement: 1.2m3/min, 0.8Mpa


5. Water Supply Requirement: 6 Tons


6. Machine Power Consumption: 20.5 KW


7. Production Line Power Consumption: 32 KW


8. Whole Line Electricity Arrangement: 250 Amps


9. Minimum Workers Number: 2 Workers





Extrusion System

The extrusion system includes gear box, extrusioin motor, inverter, screw, barrel, head and die. The extruder adopts gradient mixing type with high-speed energy saving design. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2. The head runner has good design and head matel is processed for higher hardness. The die and core will be made according to your product design and size.


Clamping Unit
Clamping unit is composed of front & back platens, clamping seat, carriage seat, mould stroking & clamping hydraulic cylinders, synchronizing mechanism, with the structure of nether crank design. Platen movements open & close, carriage up & down is assisted with linear guide rails & ball bearing sliders to increase action smoothness and position precision. The end positions & slow speed positions are controlled by proximity switches or transducers. Our nether bent arm central clamping structure insures the clamping force bearing to mould in balance, easy for scraps auto-deflashing, also good for mould's lifespan.

Electric Control
The electrical control system is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage stabilized source, air swtiches, mid relays, proximity switches, inverter and motors. The operation panel contains power switch, touch screen, alarm, hot cutter knob, auto cycle button, emergency stop button, action reversion button, extruding speed button.


Hydraulic System
The hydraulic system is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on. Our hydraulic system has been updated with proportion valve and mechanical shuttle valve for action stability and precision. It insures the oil pressure output fast but smooth, action performance is quick but with less impact.


Water & Air Supply
The pneumatic system contains air cylinder, air valves, air filters, air tubes, fast plugs and so on, for controlling the actions of head inner blowing, blow pin blowing, auto-deflashing, or pushing in & out for some special moulds. The necessary air pressure is 0.4~0.6 Mpa, air consumption is 0.6~0.8 M3/min. The water system contains water distributing blocks, ball valves, tubes, connectors and so on, for chilling the screw & barrel, hard gear box, blowing units and moulds. The necessary water pressure is 0.2~0.4 Mpa, water consumption is 2500L/hour.

Automatic Production
our machine supports auto-deflashing control system and pneumatic hardware, the scraps can be on-line removed automatically through auto-deflashing mould. Scraps fall down and slide outside of machine through a slide channel. The finished products are pushed out from another side together with platen carriage down action with the guidance of bottle collective shelves. The conveyer system can be equipped to take scraps into crusher, and convey the finished products to leakage tester or packing table. During the producing period, the machine can work automatically without the worker's help.

Working Flow Arrangement
The whole producing line totally need 2 workers. Worker No.1 takes charge of material mixing and feeding, he collects the crushed scraps into color mixer, operate the material mixing of new material, crushed material and color master batch. After mixing he carries material into material source tank, the auto-loader will feed material automatically. The other worker takes charge of bottle packing, and take the packaged bottles into storage area.

China Small PVC Cosmetic Bottle Extrusion Blow Molding Machine SRB55D-1C 428BPH Capacity supplier

Small PVC Cosmetic Bottle Extrusion Blow Molding Machine SRB55D-1C 428BPH Capacity

Inquiry Cart 0