BUY BYKR04 excavator single bucket attachment single Heavy duty single shank excavator ripper

Working principle

Vibrating pile hammer is using its high frequency vibration to vibrate pile body with high acceleration to pass the vertical vibration of mechanical produce to pile which leading to changes in the soil structure around the pile, strength decrease. Soil around the piles become liquefaction to reduce frictional resistance between side of the pile and the soil. Then using the excavator down force, vibrating pile hammer and pile body weight to sink pile into the soil. When extracting piles, in the condition of vibration to pull out the pile by using excavator lift force. Excitation force needed by pile driving machinery are comprehensive determined by site soil, soil condition, moisture content and type of pile, construction.

Product application

The efficient of vibration pile method is higher than other methods. It is mainly applied to steel sheet pile, steel pipe pile and long slender concrete precast pile within 8 meters. This pile driving method is the most suitable for working in sand and poorer effect in the clay which must select higher power model machines.

1.It is made of high strength steel plate,easy to install,easy to use.Installed with high strength ripper teeth,strong digging capacity;
2.It is most suitable for smashing the hard material,such as pan soil,secondaryh-hard stone,weathered rock and so on,to facilitate later operation.
3.It is the most convenient non-blasting excavation construction project

Application scope:

Stone field ,mine ,coal,railway and other large-scale earthwork construction.
Rock,permafrost,asphalt pavement excavating performance Most suitable for smashing the hard material,such as pan soil,secondaryh-hard stone, weathered rock and so on.