4Z7616051D 4Z7616051B Air Shock Absorber For Audi A6 C5 Front 4B Platform Air Spring Bag

4Z7616051D 4Z7616051B Air Shock Absorber For Audi A6/C5 Front 4B Platform Air Spring Bag

Our Air Shock Absorber For Audi A6/C5 Front 4B Platform Air Spring Bag will replace the original Front Air Spring Bag Strut.

Product Information

Part No.:501001B

Product Name:Air Spring Bag

What are Air Suspension Spring Bag ?

Air spring bag can also be called air springs, air shock absorbers and bellows.
Traditional spring struts use steel coil springs, while air spring struts use air springs. This can make our car more comfortable to ride and reduce vibration.

The most common causes of air strut failures are:

1. Air suspension system leak
If the vehicle is parked for a period of time, the body tilts or the front air suspension or the rear air suspension falls to the lowest state; if the air suspension suddenly leaks too much, it will cause the air suspension to be unable to adjust.

(1) Common reasons for air leakage of air suspension are:

① Air leakage of air pipeline, especially air leakage at the interface between the analysis valve body and the air suspension.

②The air spring leaks, mainly because the rubber unwinding piston is cracked or the seal with the shock absorber is poor.

③ The distribution valve body itself leaks air, mainly because the trachea interface or the internal sealing of the valve body is not tight.

2. Air suspension does not lift

If the air suspension doesn't go up and down as you want, the air strut is faulty; maybe the car's instrument air suspension fault light will come on.

The possible reasons why the air suspension cannot be lifted are:

①The signal of the body height sensor is distorted, including the sensor installation is not in place, loose, the sensor circuit failure and the sensor itself failure.

②There may be obvious fault codes that point to the damage of the control unit; there are also no fault codes but the function is invalid, and the fault is eliminated after adjusting the control unit.

③The air compressor control relay is damaged, including contact ablation, pin corrosion or bending; when replacing the air compressor, the relay must be replaced at the same time.

④ Air compressor failure. Check that there is no leakage in the entire system, and troubleshoot after switching the compressor.

⑤The air suspension system enters water, and it cannot be lifted due to icing. Before replacing the compressor, the entire pipeline must be cleaned to ensure that there is no water in the system.

⑥ For other electrical failures, replace them after confirming the cause of the failure according to the guided failure inquiry.

⑦The air suspension system has been replaced or disassembled, and the relevant parts have not been adaptively learned in accordance with the regulations. Such as disassembly and assembly of the lower swing arm, disassembly and assembly of the level sensor, and replacement of the subframe.

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.