Festo Bellows Cylinders EB-215-80 Industrial Air Springs S08101 With Metric M8

Festo Bellows Cylinders EB-215-80 Industrial Air Springs Dunlop 8’’x1 S08101 With Metric M8

EB-215-80 Festo Product Description

Air spring shock absorbers can only drive the bellows against the workpiece, otherwise they must be equipped with a stroke limit stop at the end of the stroke, otherwise the bellows will be overloaded
• In order to press the air spring shock absorber to the minimum height, a reset force is required. Usually, this is achieved by applying a load
• The entire bearing surface of the upper and lower plates of the air spring shock absorber must be used to absorb force
• Before disassembling the air spring shock absorber, the internal air must be released to prevent accidents and personal injury
• During operation, the rubber air spring shock absorber must not be in contact with other parts

EB-215-80 Festo OEM Cross others:

GUOMAT Parts NO.:1B1209-3/4

Festo Parts NO.: EB-215-80

Festo Parts NO.: EB 215 80

Festo Parts NO.: EB21580

Firestone Parts NO.: W01-M58-6165

Firestone Parts NO.: W01 M58 6165
Firestone Parts NO.: W01M586165

Contitech Parts NO.:FS 120-9
Contitech Parts NO.:FS 120 9

Contitech Parts NO.:FS 1209

Dunlop(FR) Parts NO.:8"x1 S08101

Dunlop(FR) Parts NO.:8x1 S08101

Dunlop(FR) Parts NO.:8*1 S08101

Dunlop(FR) Parts NO.: S08101

Dunlop(FR) Parts NO.:8"x1

Dunlop(FR) Parts NO.:8x1

Dunlop(FR) Parts NO.:8*1

Bosch Parts NO.: 822419003

Norgren Parts NO.: PM/31081
Norgren Parts NO.: PM 31081

Norgren Parts NO.: PM31081

Norgren Parts NO.: 8x1

Norgren Parts NO.: 8"x1

Norgren Parts NO.: 8*1

Weforma Parts NO.: WBE 300-E1
Weforma Parts NO.: WBE 300 E1

Weforma Parts NO.: WBE300E1

Airtech Parts NO.: 140293
Airtech Parts NO.: 111003/1 B-190FB

Airtech Parts NO.: 111003

Airtech Parts NO.:1 B-190FB

Megatech Parts NO.: 1S120-9 3/4 M8

Megatech Parts NO.: 1S120 9 3/4 M8

Megatech Parts NO.: 1S1209 3/4 M8

EB-215-80 Festo Technical Data

❶Nut/blind nut

Top plate screw (nut) teeth: 2 XM8
The screw center distance of the top cover plate: 70 mm
Screw (nut) teeth of the bottom cover plate: 2 XM8
The screw center distance of the bottom cover plate: 70 mm

❷Air hole/air inlet/air fitting
Air hole/air inlet: G3 / 4
The screw center distance between the air hole and the nut: 35 mm

❸cover
Top plate diameter: 135 mm
Diameter of the bottom cover: 135 mm

Bell rubber bellows
Maximum diameter of rubber bellows: 215 mm
Natural diameter of rubber bellows: 200 mm
Working stroke: minimum 50 mm to maximum 115 mm
Maximum height: 115 mm
Minimum height: 50mm
Stroke height: 65mm

❺Bumper block/bumper block
No bumper block

❻Belt loop/Belt loop
With belt loop: Without belt loop

EB-215-80 Sizes:

PNEUMATIC APPLICATION – STATIC CHARACTERISTIC VALUES

VIBRATION ISOLATION – DYNAMIC CHARACTERISTICS

Bellows cylinders EB
Technical data

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.