Mechanical Punch Rubber Air Spring Reference To S-350-4 / S-200-3 / S-100-3 / S-90-3

Mechanical Punch Rubber Air Spring Reference To S-350-4 / S-200-3 / S-100-3 / S-90-3

S-350-4 / S-200-3 / S-100-3 / S-90-3 can fit for many kinds of Mechanical Punch equipment.

S-350-4 / S-200-3 / S-100-3 / S-90-3 Mechanical Punch air spring is divided into triple, four, five Convolutions. Punch air spring air cushion made of natural rubber through a series of processes made of rubber bladder, used in the punch on the air spring manufacturing process than ordinary industrial air springs to be much more complex, so the cost will be Higher, the price is naturally much higher than the other. In the middle with stainless steel rims, S-200-3 / S-100-3 / S-90-3 three with two rims, S-350-4 four rims with three rims.

Detailed Parameter Table of S-350-4 / S-200-3 / S-100-3 / S-90-3:

Description about the Mechanical Punch equipment:

S-350-4 / S-200-3 / S-100-3 / S-90-3 can use in the most common mechanical press.Such air springs can effectively reduce the vibration, there is a more humanistic role is to reduce noise, is our staff in a relatively quiet environment, to protect the punch equipment and also protect the workers.

The most common mechanical press driven by motor crankshaft connecting rod, eccentric gear (or wrist joints) to make the slider move, and punching machine drive system characteristics to determine the speed in all parts of the stroke and force application. And the mechanical punch depends on the system, the lower the dead point, the greater the force. When considering the same time, mechanical punch can have more impact and is more commonly used in industrial applications.

Most traditional mechanical press is the use of induction motor, the early mechanical press with v motor drive, adjust the coupled mechanical and electrical flow to adjust the torque, later will use inverter driven induction motor, induction motor used in the press will have a flywheel energy storage component, regardless of whether the processing, the flywheel will continue running, to process a flywheel is needed to drive the slider with a clutch to make operation. Later also useful servo motor as the power source of the servo press , the servo press without flywheel energy storage, processing when the drive to work, and can be determined in accordance with the processing characteristics of the slider velocity curve in different locations, can be a difficult process.

Product detail photos Of S-350-4 / S-200-3 / S-100-3 / S-90-3:

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.