130w 150w 180w Co2 Laser Cutting Tube 160mm Length High Performance
Brand Name:TAIYI
Certification:CE
Model Number:C serie 60W
Minimum Order Quantity:1
Delivery Time:5-8 work days
Payment Terms:T/T, Western Union, MoneyGram, L/C
Contact Now
Add to Cart
Verified Supplier
Location:
Dongguan Guangdong China
Address:
Room 101, Building 2, No. 12 Xiangya Road, Dalingshan Town, Dongguan City, Guangdong ,China
Supplier`s last login times:
within 25 hours
Product Details
Company Profile
Product Details
60w/80w/100w/130w/150w/180w Co2 Laser Tube Laser Cutting Tube For Co2 Laser Cutter
Specification:
| Model | Rated Power(W) | Max Power(w) | Length(mm) | Diameter(mm) | Catalyze |
| JSD-50-700 | 40 | 50 | 700 | 50 | Yes |
| JSD-50-800 | 50 | 60 | 800 | 50 | Yes |
| JSD-50-1000 | 50 | 70 | 1000 | 50 | Yes |
| JSD-55-1000 | 50 | 70 | 1000 | 55 | Yes |
| JSD-55-1200 | 60 | 80 | 1200 | 55 | Yes |
| JSD-55-1250 | 60 | 80 | 1250 | 55 | Yes |
| JSD-60-1200 | 60 | 80 | 1200 | 60 | Yes |
| JSD-60-1250 | 60 | 80 | 1250 | 60 | Yes |
| JSD-80-1250 | 80 | 100 | 1250 | 80 | Yes |
| JSD-60-1600 | 80 | 110 | 1600 | 60 | Yes |
| JSD-80-1200 | 90 | 100 | 1200 | 80 | Yes |
| JSD-80-1400 | 100 | 120 | 1400 | 80 | Yes |
| JSD-80-1450 | 100 | 120 | 1450 | 80 | Yes |
| JSD-80-1600 | 130 | 150 | 1600 | 80 | Yes |
| JSD-80-1650 | 130 | 160 | 1650 | 80 | Yes |
| JSD-80-1800 | 150 | 180 | 1800 | 80 | Yes |
| JSD-80-2000 | 180 | 190 | 2000 | 80 | Yes |
Product installation:
1, first line the electrode, (+, -) is not wrong. CO2 laser (laser
tube) installation instructions:
2, installation of cooling water pipe, the installation method of
water from the negative electrode, the positive water and meet the
principle of falling out, and the interface can not leak.
Sufficient water must be stored in the pre - storage water storage
device. After water, the water cooling pipe must be used without
air bubbles (must be viewed before each use). If the laser tube is
vertically installed, please notice that there is no bubble at the
top of the laser tube. When the bubble exists, it will cause damage
to the laser tube if it runs.
3, in order to maintain the good performance of the laser tube,
please use a temperature controlled water cooler between 20-25
degrees Celsius. If the cooling water is unstable, the output power
of the laser tube will be unstable.
4, when the laser tube is installed, there is enough space between
the high pressure end of the laser tube and any other metal
surface. If the gap is too small, triggering the high pressure of
the laser tube will cause fire to the metal surface, which will
cause damage to the laser tube and even cause damage to other main
components of the laser.
5, it is suggested that an automatic inspection device be added to
the cooling water circulation system of the laser tube, so as to
prevent the laser tube from overheating due to the water failure.
For details, consult the supplier of the laser machine.
130w 150w 180w Co2 Laser Cutting Tube 160mm Length High Performance
Inquiry Cart
0