Contact: Miya

Job Title: Sales Manager

Skype: live:miyazheng520

Email:miya@mvme.cn

Tel: 86-18020776792(Whats App )

QQ :2851195450

About us

We are a professional engaged in the global well-known brands (DCS system, robotic system, large) servo control system module, spare parts sales enterprises,

the company product content is: the distributed control system (DCS), programmable controller (PLC), MOTEOROLA - MVME industrial converter (Anybus) modules, industrial control,

communication, remote I/o module (RTU), industrial computer (IPC), low frequency screen (IPC) for industrial use, SCSI interface (50/69/80 pin) Anybus (Gateway).

The spare parts we sell all provide a year of quality assurance, and have been strictly tested and certified, has become a global industrial automation spare parts and parts sales enterprises.

DS200FCRRG1AKD

Product Description

The GE Firing Circuit Control Board DS200FCRRG1AKD features 1 terminal block with terminals for 95 signal wires.

It also contains 10 2-pin connectors, 2 ribbon cables, and a programmable logic device. The IDs of the 10 2-pin connectors

begin with a numerical value and end with PL.

The numbers are assigned in sequence and are printed on the surface of the board for easy reference by the installer or servicer.

For example, some of the IDs are 1PL, 5PL, 12PL, and 15PL.

Because of the number of 2-pin cables attached to the connectors, it is important to record where the cables are attached

before you disconnect them.

Mark on the cables the ID of the connector it is attached to before you disconnect it. Then, when you are prepared to connect

the cables on the replacement board, the task is fast and accurate.

If you connect the 2-pin cables to the wrong connectors, you might not realise the error until you attempt to start the drive.

This leads to more down time for the drive and a loss of productivity

for the drive and other related activities performed at the site.

To remove signal wires from the terminal block, have on a hand a narrow flat blade screwdriver.

Loosen the retention screw and pull out the signal wire. Make sure the signal wire

has about 0.5 inches of insulation removed from the end of the wire. Best practice is to have all the bare wire inserted into the terminal.

However, if less than 0.5 inches of insulation is removed, the connection might not be made between the terminal and the signal wire.

If you are interested in our products,pls contact us by the following way.

Wait for your inquire.

Miya(manager)
Email:miya@mvme.cn
Skype:miyazheng520
QQ :2851195450
Tel:0592-5087576
86-18020776792

Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (PC), industrial low-frequency screens (IPC), human-machine interface SCSI (50, 68, 80Pin ) AnyBus(Gateway)o The spare parts we sell provide one-year quality guarantee and have undergone strict testing and certification. Now we have become a global sales enterprise of industrial automation spare parts and components.

Moore Automation are still working and able to shipping worldwide. Our company has many products in stock,which are immediately available.The warranty is 1 years which apply to all the new products.If you purchase one more parts from us,we can make a discount to you. If you have any questions, please feel free to contact us. We can supply various automation parts. If you want to buy parts, please send the part model to my email and I will reply to you immediately after receiving it. Hope anyone enquire from us. We have tens of thousands of spare parts and spare parts warehouse . Products and services to serve for installing of users control system.

Distributed control systems, programmable controllers, panel controller and drive! * Our mission is to help you! * Reduced maintenance costs! We have a large inventory of control system components. We also made a lot of new hardware and discontinued spare parts to help supporting your existing control systems. We have experienced staff, extensive testing , all the spare parts which we sold are with warranty period of one year, and they have undergone rigorous testing and certification!