Add to Cart
80V 625Ah Forklift Traction Battery DIN Standard Flooded Lead Acid
Battery
Product Strength
1. High-quality flooded lead acid battery
2. High-performance tubular positive plates
3. >= 1500 times cycle life.
4. Meet IEC 60254 standard.
5. CE,ISO9001 and ISO14001.
6. Automatic watering syste and Argitation system.
7. Larger and thicker plate means less internal corrosion
Traction Battery for Forklifts -- DIN Standard | |||||
Type | 5hrs Capacity (Ah) | Overall Dimension (mm) | Weight (kg) | Poles | Cell Volt |
2PzS110 | 110 | 47x198x339x370 | 5.9 | 2 | 2 |
3PzS165 | 165 | 65x198x339x370 | 8.1 | 2 | 2 |
4PzS220 | 220 | 83x198x339x370 | 10.5 | 2 | 2 |
5PzS275 | 275 | 101x198x339x370 | 12.8 | 2 | 2 |
6PzS330 | 330 | 119x198x339x390 | 15.1 | 2 | 2 |
7PzS385 | 385 | 137x198x339x390 | 17.4 | 2 or 4 | 2 |
8PzS440 | 440 | 155x198x339x390 | 19.7 | 2 or 4 | 2 |
Forklift/Traction battery’s daily operation
1. Daily check
1). Electrolyte level:Check the acid level every week(need to fill
distilled water or deionized water every 3 days if battery working
in the high temperature).If the electrolyte’s level is too low, it
might cause battery plate destroyed and shorten battery’s service
life and etc problem. The methods of checking level: Open the vent
cap,if the electrolyte is lower the top of vent cap, it means
electrolyte level is over-lower and need to fill distilled water or
deionized water, if electrolyte is parallel or higher than the vent
cap,it is the proper position)
2). Connector, connecting wires and cap: Must check if there is any
corrosion between connector pole’s joining and leading wires, also
check if the cap had the transmutative situation or over-heat
problem.
3). Appearance:battery’s exteriordirty would cause creepag, must
keep battery’s surface to be clear and dry.
2. Maintenance:
1). Fill water:fill distilled water or deionized water according to electrolyte
level, don’t fill too much distilled water in order to delay
filling time, too much distilled water would cause lower specific
gravity, electrolyte would spill over,and this situation would
corrode metal box and cables, and effect battery’s service life and
creepag.
2). Chaging:There is gas when charging, so need to keep ventilative
environment, and no naked light. And the oxygen and acidic gas by
charging would affect around environment. There would have electric
arc when pull out the charging plug, please cut off the charger’s
switch and then pull out the plug. There are much hydrogen after
finish the charge, naked light is not allowed.
3). Equalizing charge:battery should need a equalizing charge every
month(meanssmall charging current but long time charge), in order
to keep battery’s capacity and long service life.
4). Connector,leading wire,cap’s maintenance: must be operated by the
professional engineer.
5). Clean:battery should keep surface to be clean, if surface has
the dirty things would cause short circuit, also cause terminal and
connectors to be corroded. Please use wet cloth to clean battery in
order to avoid static electricity.If there is no leakage hole at
the bottom of metal box, pleas avoid using water to clean the
battery, in order there are too much water to corrode metal box, if
there is leakage hole at the bottom of metal box, you can use water
to clean the battery.
3. Storage:
1). Storage location:do not make battery short circuit;there would
cause short circuit after the rain, must keep the battery in the
open air and shady location.
2). Used batter:used battery still have capacity, please keep the
battery as per storage method.
4. Electrolyte’s operation
1). Check density:use inhale densimeterto check density, do not
spill electrolyte out from the battery, and make sure wear the
protective cloth.
2). Other operation: Should refer to professional engineer,
especially when fill the electrolyte
3). Electrolyte’s leakage:urgent handle is needed when battery’s
turn over or destroy happens.
Our Customers