

Add to Cart
QSFP Module 400GBASE-FR4 QSFP-DD 1310nm 2KM Transceiver Single Mode
Duplex LC
400G Ethernet Optical Module Advantages
► Compliant with 400G-FR4 Technical Specification rev 2.0
-(100G Lambda MSA) and 400GBASE-FR4(IEEE802.3cu)
► Compliant with IEEE 802.3bs standard:
-400GAUI-8 electrical interface
► Compliant with QSFP-DD MSA HW Rev 5.1
-type 2 housing with duplex LC connector
► Compliant with QSFP-DD CMIS Rev 4.0
Electrical Specification High Speed Signal (compliant with IEEE 802.3bs 400GAUI-8)
Receiver (Module Output) | ||||||
Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
AC common-mode output Voltage (RMS) | - | - | 17.5 | mV | ||
Differential output Voltage | - | - | 900 | mV | ||
Near-end Eye height, differential | 70 | - | - | mV | ||
Far-end Eye height, differential | 30 | - | - | mV | ||
Differential Termination Mismatch | - | - | 10 | % | ||
Transition Time (min, 20% to 80%) | 9.5 | - | - | ps | ||
DC common mode Voltage | -350 | - | 2850 | mV | ||
Transmitter (Module Input) | ||||||
Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
Differential pk-pk input Voltage tolerance | 900 | - | - | mV | ||
Differential termination mismatch | - | - | 10 | % | ||
Single-ended voltage tolerance range | -0.4 | - | 3.3 | V | ||
DC common mode Voltage | -350 | - | 2850 | mV |
Electrical Specification Low Speed Signal (compliant with QSFP-DD HW Rev 5.1)
Parameter | Symbol | Min. | Max. | Unit | Condition |
Module output SCL and SDA | VOL | 0 | 0.4 | V | |
Module Input SCL and SDA | VIL | -0.3 | VCC*0.3 | V | |
VIH | VCC*0.7 | VCC+0.5 | V | ||
LPMode, ResetL, ModSelL and ePPS | VIL | -0.3 | 0.8 | V | |
VIH | 2 | VCC+0.3 | V | ||
IntL | VOL | 0 | 0.4 | V | |
VOH | VCC-0.5 | VCC+0.3 | V |
Ordering Information
Part No. | Application | Data Rate | Laser Source | Fiber Type |
LNK-QDD-400G-FR4-2 | 400GBASE-FR4 | 400GB Ethernet | EML | Single Mode Fiber |