

Add to Cart
Incoloy 901
UNS | Trademark |
N09901 | Incoloy 901 |
Incoloy 901 Chemical composition:
Alloy | % | Ni | Cu | Al | Fe | Ti | Co | Mn | S | C | Si | P | Cr | Mo | B |
Incoloy 901 | Min. | 40.0 | Balance | 2.35 | 11.0 | 5.0 | 0.01 | ||||||||
Max. | 45.0 | 0.50 | 0.35 | 3.10 | 1.0 | 1.0 | 0.03 | 0.10 | 0.60 | 0.03 | 14.0 | 7.0 | 0.02 |
Incoloy 901 Physical properties:
Density | 8.14 g/cm3 |
Melting point | 1280-1345℃ |
Incoloy 901 minimum mechanical properties in the room temperature:
Status | Tensile strength Rm N/mm2 | Yield strength RP0.2 N/mm2 | Elongation A5 % |
Incoloy 901 | 1034 | 689 | 12 |
Description
A nickel-iron-chromium alloy containing titanium and aluminum for
precipitation hardening and molybdenum for solid-solution
strengthening. The alloy has high yield strength and creep
resistance at temperatures to about 1110°F (600°C). A subtantial
iron content enables the alloy to combine high strength with good
forging characteristics. Used in gas turbines for discs and shafts.
Standard products form is round.
Corrosion Resistance
Alloy 901 has good corrosion resistance to the atmospheres normally
found in jet engine operations. It has slightly lower scaling
resistance than such alloy as Types 309 and 310 stainless steel.
Workability
Hot Working
Alloy 901 is forged between 2050°F (1121°C) and 1850°F (1010°C),
metal temperature. Light hot work may be continued down to 1600°F
(871°C) but not below. Metal temperature should not exceed 2050°F
(1121°C) during rapid working. Billets should be charged into a hot
furnace and heated rapidly through the precipitation hardening
range.
Weldability
Alloy 901 can be welded by the inert-gas-arc method. It is
difficult to weld. All welding should be done in the solution
treated condition. Cold worked parts should be re-solution treated
before welding. A re-solution treatment is recommended after
welding before stabilizing and aging.
We can provide Incoloy 901 material in the form of flange, fittings, pipes, fasteners.