Home /Boiler Parts /

Carbon Steel Economizer with Bends for Waste Heat Boiler and Power Station Boilers

Carbon Steel Economizer with Bends for Waste Heat Boiler and Power Station Boilers

Brand Name:HDB
Certification:ISO9001 , SGS , TUV , ASME , EN
Model Number:Boiler Economizer
Minimum Order Quantity:5 tons
Delivery Time:30~50 days
Place of Origin:China
Contact Now

Add to Cart

Verified Supplier
Address: Address: N0.1, Dongli Road, Donglai, Zhangjiagang City, Jiangsu Province, China
Supplier`s last login times: within 1 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

Carbon Steel Economizer with Bends for Waste Heat Boiler and Power Station Boilers


Economizer Introduction
Boiler economizer is part of the heating area of boiler, to heat the feed water into saturated water inside the flue ducting, due to its absorption of low temperature flue gas heat, the economizer reduces the exhaust temperature of flue gas, save the energy, improve the efficiency, so called as economizer. Economizer steel tube type is without pressure limit, can be used as a boiling type, generally made by the outer diameter of 32 ~ 51 mm carbon steel tube.Sometimes in tubes with fins and fin, to improve the heat transfer effect. Boiler economizer is used for recovery of waste heat from boiler.

Boiler economizer is a device that is designed to increase the operating efficiency of a boiler, cutting down on its operational costs over the lifetime of the boiler.
Although the savings on any given day may be relatively small, the impact over time can be significant; some boilers are designed with economizers built in, while in other cases, an economizer can be fitted on after the act.
The boiler economizer acts as a waste heat recovery device, ensuring that this heat does not go unused.
Instead, the heat is used to essentially preheat the water, so that less heat is required to bring the water to a temperature high enough to make steam.

Diameter32Φ 38Φ
Type

Casting iron economizer;bare tube economizer;finned tube

Economizer;spiral finned tube economizer

Fin heightLess than 17mm
Fin pitch2.1-5mm
Fin thickness3-4mm
material

Tube:Carbon steel,alloy steel,

customized

Fin:copper;Aluminum

advantages

1.better product quality and longer service life.

2.energy conservation and environmental protection.

3.significantly improve cycle efficiency.


The economizer can absorb the heat of high temperature flue gas,reduce the exhaust temperature,save energy,and improve the efficiency of boiler.

Non-standard size please provide these parameter

Boiler economizer(gas liquid heat exchanger)design
Flue gas inlet(temp.)Flue gas outlet(temp.)Liquid inlet(temp.)Liquid outlet(temp.)Flue gas flow
ºCºCºCºCm3/h


China Carbon Steel Economizer with Bends for Waste Heat Boiler and Power Station Boilers supplier

Carbon Steel Economizer with Bends for Waste Heat Boiler and Power Station Boilers

Inquiry Cart 0