IEC 62368-1-Annex E.2 Testing Box Audio Amplifier Normal Operating Temperature Measurements Box
Brand Name:Kingpo
Certification:Calibration Certificate
Model Number:IEC 62368-1-Annex E.2
Minimum Order Quantity:1
Delivery Time:7 work days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Hong kong Hong kong China
Address:
RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
Supplier`s last login times:
within 11 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
IEC 62368-1-Annex E.2 Testing box | Audio amplifier normal operating temperature measurements box
Test conditions for equipment containing audio amplifiers
E.2
Audio amplifier normal operating conditions
Equipment containing an audio amplifier shall be operated using a
sine wave audio signal source at a frequency of 1 000 Hz. In the
case where an amplifier is not intended for operation at 1 000 Hz,
the peak response frequency shall be used.
The equipment shall be operated in such a way as to deliver 1/8
non-clipped output power to the rated load impedance.
Alternatively, a band-limited pink noise signal may be used for
operation after non-clipped output power is established using a
sine wave. The noise bandwidth of the pink noise test signal shall
be limited by a filter of a characteristic as shown in Figure E.1.
If visible clipping cannot be established, the maximum attainable
power shall be considered as the non-clipped output power.
In addition, all of the following conditions shall be considered
under normal operating conditions:
– The most unfavourable rated load impedance or the actual
loudspeaker, when provided,is connected to the amplifier output.
– All amplifier channels are operated simultaneously.
– Organs or similar instruments that have a tone-generator unit
shall not be operated with the 1 000 Hz signal, but instead be
operated with any combination of two bass pedal keys,if present,
and ten manual keys depressed. All stops and tabs that can increase
the output power shall be activated and the equipment shall be
adjusted to deliver 1/8 of the maximum attainable output power.
– Where the intended amplifier function depends on phase difference
between two channels, there shall be a phase difference of 90°
between signals applied to the two channels.
–For equipment containing multi-channel amplifiers, where some
channels cannot be operated independently, those channels shall be
operated using the rated load impedance at the output power level
that corresponds, by design, to 1/8 of the non-clipped output power
of the adjustable amplifier channel(s).
–Where continuous operation is not possible, the amplifier shall be
operated at the maximum output power level that allows continuous
operation.
The temperature measurements shall be carried out with the
equipment positioned in accordance with the instruction manual
provided by the manufacturer, or, in the absence of instructions,
the equipment shall be positioned 5 cm behind the front edge of an
open-fronted wooden test box with 1 cm free space along the sides
and top and 5 cm depth behind the equipment.
IEC 62368-1-Annex E.2 Testing Box Audio Amplifier Normal Operating Temperature Measurements Box
Inquiry Cart
0