IEC 60529 IP Testing Equipment Oscillating Tube Tester IPX3 / IPX4
Brand Name:Kingpo
Certification:Calibration Certificate
Minimum Order Quantity:1
Delivery Time:25 working days
Payment Terms:T/T
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Hong kong Hong kong China
Address:
RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
Supplier`s last login times:
within 11 hours
Product Details
Company Profile
Product Details
IEC 60529 Oscillating Tube Tester, IPX3/IPX4
Product infomation
The test is made using one of the two test device described in
figure 4 and in figure 5 in accordance with the relevant product
standard.
a) Conditions when using the test device as in figure 4(oscillating
tube)
the total flow rate is adjusted as specified in table 9 and is
measured with a flow meter.
The oscillating tube is provided with spray holes over an arc of
60°either side of the centre point. The support is not preforated.
The enclosure to be tested is placed at the centre point of the
semicircle. The tube is caused to oscillate through an angle of
120°, 60°on either side of the vertical, the time for one complete
oscillation (2 x 120°)being about 4s and the test duration being 5
min.
The enclosure is then turned through an horizontal angle of 90°and
the test is continued for a further 5 min.
The maximum acceptable radius of the oscillating tube is 1600mm.
If for certain types of apparatus it is not possible to wet all
parts of the enclosure undere test, the support of the enclosure
may be moved up or down. The hand-held test device as in figure
5(spray nozzle) should be used as a preference in such cases.
KP-IPX3001
KP-IPX3002
IEC 60529 IP Testing Equipment Oscillating Tube Tester IPX3 / IPX4
Inquiry Cart
0