Add to Cart
Metal Glazed Tile Roll Forming Machine , Corrugated Roofing Sheet Making Machine
Brief introduction:
The roll forming machines can produce various of steel roof and
wall panel, it is a new building materials, the products are widely
used as the roof and wall of factory, warehouse, garage, gymnasium,
exhibition center, cinema, theatre, etc. It has many advantages,
such as easy installation, short building period, beauty, light
weight but high strength.
The chart of Process Flow and components
Manual uncoiler— Roll forming machine— Computer control system—
Hydraulic control system— Form cutter
Advantages of the roofing sheet roll forming machine
1. High efficiency
2. Lower cost
3. Long life time: 30years
4. Low energy consumption
5. PLC control, Panasonic or Siemens or eura
6. Easy operation
7. Beautiful and best quality
Parameters of the Machine:
1. Suitable material: Color steel plate, Galvanized Board, Aluminum
Plate, etc.
2. Suitable thickness: 0.3-0.8mm or other thickness
3. Forming specifications: Depending on specific requirements of
customers
4. Forming speed: 0-3m/min
5. Main motor power: 4Kw (depending on specific requirements of
users)
6. Cutting mode: Hydraulic cutting
7. Hydraulic station power: 4Kw (depending on specific requirements
of users)
8. Control system: PLC systems from Mitsubishi, Schneider and
Panasonic products, electrical appliances of famous brands
9. Way of drive: One inch chain
10. Optional accessories: Hydraulic uncoiler.
11. Material of roller: High grade 45# forged steel plated with
hard chrome plating
We can also design many kinds of roll forming machines according to
your specific profile drawing.
Welcome to contact and visit us, waiting for your cooperation
sincerely.
No. | main parameter of glazed tile forming machine | |
1 | Suitable to process | Color steel plate, Galvanized Board, Aluminum Plate |
2 | Width of the plate | 1000mm |
3 | Rollers | 12rows |
4 | size | 6.9*1.5*1.5m |
5 | Main moter power | 4kw |
6 | Hydraulic unit power | 4kw |
7 | Thickness of the plate | 0.3-0.8mm |
8 | Productivity | 0-3m/min |
9 | Diameter of the roller | Φ70mm |
10 | Voltage | 380V 50Hz 3phases |
11 | Main frame | 300mmH steel |
12 | Material of the cutting plate | Cr12 |
13 | Control system | PLC Frequency Control System with touch screen |
Main Accessories:
(1). Main Forming Machines;
(2). 5 Tons Manual Uncoiler;
(3). Hydraulic System;
(4). PLC Computer Controlling System With Touching Screen (Brand: Schneider for PLC, touching
screen, cencorder and frequency changer)