4.00mm 26 Awg Rectangular Magnet Wire Aiw Insulated Custom Enameled

4.00mm AIW insulated wire custom enameled rectangular copper wire

Meet the design requirements of lower height, smaller volume, lighter weight and higher power density electronic and motor productsInsulation is coated uniformly and adhesively .Good Insulation property and withstand voltage is more than 1000V

Under the same cross-sectional area, it has a larger surface area than the round enameled wire, which can effectively reduce the "skin effect", reduce high-frequency current loss, and be more suitable for high-frequency conduction work.

Complied the standard of NEMA, IEC60317, JISC3003, JISC3216 or customized

In the same winding space, the application of flat enameled wire makes the coil slot full rate and space volume rate higher; the resistance can be effectively reduced, a larger current can be passed, a higher Q value can be obtained, and it is more suitable for high current load operation.

Products using flat enameled wire have simple structure, good heat dissipation, stable performance and good consistency; good temperature rise current and saturation current are still maintained in high frequency and high temperature environments; strong electromagnetic interference (EMI) resistance, low vibration and noise Low, can be installed in high density.

RUIYUAN was established in 2002, located in Tianjin City,the second largest port city in China.We have been focusing on different kinds of high quality wires: enameled round copper wire, rectangular enameled copper triple insulated wire, silk covered Litz wire, bonding wire and special enameled wire for 21 years.Ruiyuan is one of the pioneers in producing micro thin enameled wires below 0.03mm in China. Our R & D team has 20 years of market experience. In 2019, our finest diameter is 0.011mm, and mass production has been achieved. All of our products are UL, RoHS certified, in line with industry standards IEC60317, JIS C 3202, NEMA, NW82.